Manual RadioShack PRO-28 - 30 Channel (page 12 of 40) (English)

570003

Zoom out

Zoom in

1/40

USING VEHICLE BATTERY POWER

You can power the scanner from your vehicle’s cigarette lighter socket

with an optional DC cigarette lighter power cord (such as Cat. No. 270-

1533).

Cautions:

• The recommended DC power cord supplies 12 volts and delivers

at least 200 milliamps. Its center tip is set to positive and its plug

properly fits the scanner’s

POWER

and

CHARGE

jacks. Using a

power cord that does not meet these specifications could damage

the scanner or the power cord.

• To protect your vehicle’s electrical system, always plug the power

cord into the scanner before you plug it into your vehicle’s ciga-

rette-lighter socket. Always unplug the power cord from the vehi-

cle’s cigarette lighter socket before you unplug it from the scanner.

Note:

The scanner receives a 12-volt input at the

CHARGE

POWER

jack and reduces it to the 6 volts required by the scanner.

1. Plug the power cord’s barrel plug into your scanner’s

POWER

jack.

2. Plug the other end of the power cord into your vehicle’s cigarette-

lighter socket.

Notes:

• If you installed rechargeable nickel-cadmium batteries in the

scanner, remove the plastic cap from the

CHARGE

jack and put

the cap in the

POWER

jack. Connect the DC power cord to the

CHARGE

jack. This powers the scanner and recharges the bat-

teries at the same time. See “Charging Nickel-Cadmium Batter-

ies.”

20-508.fm Page 12 Wednesday, August 4, 1999 1:50 PM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of RadioShack PRO-28 - 30 Channel in the language / languages: English as an attachment in your email.

The manual is 0,45 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

RadioShack PRO-28 - 30 Channel Manual

Product: