Manual RadioShack PRO-2053 - 300 Channel (page 28 of 56) (English)

570004

Zoom out

Zoom in

1/56

Special Features

voice channel or during trunking delay

time. Therefore the priority check seems

random during peak hours. Do not over-

estimate the priority check during trunk-

ing operation.

• If you program a weather channel as the

priority channel, the scanner stays in the

priority channel only when the scanner

detects the weather alert tone.

To program a frequency in the priority chan-

nel:

1. Press

MAN

2. Use the number keys to enter the chan-

nel number which contains the fre-

quency you want to program as the

priority channel. Then press

MAN

again.

3. Press

FUNC

then

PRI

,I@ý á

I@ý áI@ý á

I@ý á?8EE<C

?8EE<C?8EE<C

?8EE<C

blinks on the bottom line.

To program the priority channel directly:

1. Press

PROG

2. Press

PRI

3. Enter the desired frequency, then press

ENTER

Note:

This scanner cannot set a channel as

the priority channel if the channel's receive

mode is MOT or ED.

To program a weather channel as the priority

channel:

1. Press

2. Select the weather channel you want to

program as the priority channel.

3. Press

FUNC

then

PRI

,I@ý á

I@ý áI@ý á

I@ý á?8EE<C

?8EE<C?8EE<C

?8EE<C

flashes on the bottom line two times.

To turn on the priority feature, press

PRI

appears on the top line while in scanning

mode.

,.%F

.%F.%F

.%FE

(or

,.%NO

,.%NO,.%NO

,.%NO

if you set the priority

to a weather frequency) appears on the bot-

tom line. If the scanner detects activity on the

priority channel,

,I@ý á

I@ý áI@ý á

I@ý á?8EE<C

?8EE<C?8EE<C

?8EE<C

appears for 3

seconds. Or if the scanner detects a weather

alert tone in Priority WX mode,

,I@ý á

I@ý áI@ý á

I@ý á?8EE<C

?8EE<C?8EE<C

?8EE<C

appears for 3 seconds then changes to

3<8K?<Iý ã(!.0

3<8K?<Iý ã(!.03<8K?<Iý ã(!.0

3<8K?<Iý ã(!.0

and the scanner sounds an

alert. The scanner sounds the alert for five

minutes when it receives the weather alert

signal. After five minutes the alert stops and

the scanner beeps every ten seconds. Press

any key to stop the sound. The scanner is

ready to receive a new signal.

Notes:

• Priority WX is only for receiving a

weather alert.

• When the scanner detects a 1050 Hz

alert tone, priority WX activates and you

hear a weather alert.

• If you program a weather frequency into

the priority channel and the scanner

detects a weather alert tone on that fre-

quency, the scanner sounds the alert

tone.

To turn off the priority feature, press

PRI

CHANGING THE RECEIVE

MODE

The scanner is preset to the most common

AM or FM receive mode for each frequency

range. The preset mode is correct in most

cases. However, some amateur radio trans-

missions and trunked systems do not oper-

ate in the preset mode. If you try to listen to a

transmission when the scanner is not set to

the correct receive mode, the transmission

might sound weak or distorted.

If you want to listen to trunking transmissions

in closed mode, you might have to change

the receive mode.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of RadioShack PRO-2053 - 300 Channel in the language / languages: English as an attachment in your email.

The manual is 0,27 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

RadioShack PRO-2053 - 300 Channel Manual

Product: