570004

RadioShack PRO-2053 - 300 Channel Manual

25
Zoom out
Zoom in
Previous page
1/56
Next page
25
Operation
quency. The display indicates the bank
and channel number. After about 1 sec-
ond, the frequency to be copied flashes.
3. Press
ENTER.
All the conditions such as
receiving mode and delay condition are
copied on the channel.
á?8Eý /KFI<ü
á?8Eý /KFI<üá?8Eý /KFI<ü
á?8Eý /KFI<ü
briefly appears. The scanner automati-
cally returns to search mode.
If you try to copy a frequency which is
already stored, the scanner sounds the
notice tone 3 times after you press
ENTER
.
LGCô=ý á?OOO
LGCô=ý á?OOOLGCô=ý á?OOO
LGCô=ý á?OOO
appears at the
bottom line. If you want to copy the
duplicate frequency anyway, press
ENTER
, or if not, press
CLEAR
to cancel.
Copying a Frequency into a
Vacant Channel in a Specified
Bank
You can copy a frequency into a vacant
channel in a specified bank when the scan-
ner stops on the frequency during search or
tune mode.
1. Press
FUNC
then
ENTER
when you find
a frequency you want to copy.
â8EBé
â8EBéâ8EBé
â8EBé
/K
/K/K
/KFI<å
FI<åFI<å
FI<å
appears.
2. If you want to copy the frequency into
bank 9, press
ENTER
. It is stored in the
first available vacant channel in the
bank. Or, press your desired bank num-
ber to store, then press
ENTER
.
á?8E
á?8Eá?8E
á?8E
/KFI<ü
/KFI<ü/KFI<ü
/KFI<ü
appears for 2 seconds. All the
conditions such as receiving mode and
delay condition are copied on the chan-
nel. After about 2 seconds, the scanner
automatically returns to search mode.
3. If you try to copy a frequency which is
already stored, the scanner sounds the
notice tone 3 times after you press
ENTER
.
LGCô=ý á?OOO
LGCô=ý á?OOOLGCô=ý á?OOO
LGCô=ý á?OOO
appears at the
bottom line. If you want to copy the
duplicate frequency anyway, press
ENTER
, or if not, press
CLEAR
to cancel.
Copying a Frequency into the Pri-
ority Channel
You can copy a frequency into the priority
channel (see “Priority” on Page 27) when the
scanner stops on the frequency during
Search, Scan, Manual, Tune, or WX mode.
Press
FUNC
then
PRI
when the frequency is
on the display. The display flashes twice and
the frequency is copied to the priority chan-
nel.
SCANNING THE CHANNELS
To begin scanning channels or to start scan-
ning again after monitoring a specific chan-
nel, press
SCAN
.
Note:
You must store frequencies into chan-
nels before the scanner can scan them. The
scanner does not scan through empty chan-
nels.
The scanner scans through all channels (ex-
cept those you have locked out) in the active
banks (see "Turning Channel-Storage Banks
Off and On" and “Locking Out Channels or
Frequencies” on Page 26).
Note:
To change the scanning direction,
press
8
88
8
or
9
99
9
.
Turning Channel-Storage Banks
Off and On
To turn off banks while scanning, press the
bank's number key so the bank's number
disappears. For example, to turn off bank 1,
press
1
. The scanner does not scan any of
the channels within the banks you turned off.
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for RadioShack PRO-2053 - 300 Channel at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of RadioShack PRO-2053 - 300 Channel in the language / languages: English as an attachment in your email.

The manual is 0,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info