Manual RadioShack PRO-2040 - 100 Channel (page 8 of 44) (English)

570013

Zoom out

Zoom in

1/44

Using Vehicle Battery Power

To power your scanner from your ve-

hicle’s battery power, you need a DC

power cord (such as Radio Shack

Cat. No. 270-1533).

Cautions:

• Your vehicle must have a 12-volt

DC, negative-ground electrical

system.

• The recommended DC power

cord supplies 12 volts and deliv-

ers at least 500 milliamps. The

center tip on the barrel plug is

set to positive, and the plug

properly fits the scanner’s

12V

jack. Using a DC power cord

(or adapter) that does not meet

these specifications could dam-

age the scanner or the cord (or

adapter). The scanner’s display

dims if the DC cord (or adapter)

you use does not provide the

required 12 volts DC.

• Be sure you connect the DC

cord to the scanner before you

connect it to the vehicle’s ciga-

rette-lighter plug. Then discon-

nect the cord from the vehicle’s

cigarette-lighter plug before you

disconnect it from the scanner.

Follow these steps to use vehicle

battery power.

1. Insert the barrel plug into the

scanner’s

DC 12V

jack.

2. Plug the other end of the

adapter into your vehicle’s ciga-

rette-lighter socket.

Note:

If the scanner does not oper-

ate properly when you use a DC cord

(or adapter), unplug the cord (or

adapter) from the lighter socket and

clean the socket to remove ashes

and other debris.

DC 12V Jack

20-414.fm Page 8 Wednesday, August 4, 1999 11:12 AM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of RadioShack PRO-2040 - 100 Channel in the language / languages: English as an attachment in your email.

The manual is 0,98 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

RadioShack PRO-2040 - 100 Channel Manual

Product: