569963

RadioShack 200-Channel VHF-AIR-UHF Manual

6
Zoom out
Zoom in
Previous page
1/32
Next page
6
Preparation
ˆ
Preparation
POWER SOURCES
Using AC Power
You can power the scanner using the
supplied 12V, 300mA AC adapter.
Cautions:
You must use a Class 2 power
source that supplies 12V DC
and delivers at least 300 mA.
Its center tip must be set to positive and
its plug must fit the scanner's
DC12V
jack. The supplied adapter meets these
specifications. Using an adapter that
does not meet these specifications
could damage the scanner or the
adapter.
• Always connect the AC adapter to the
scanner before you connect it to AC
power. When you finish, disconnect the
adapter from AC power before you
disconnect it from the scanner.
Warning:
To prevent electric shock, do not
use the AC adapter’s polarized plug with an
extension cord, receptacle, or other outlet
unless you can fully insert the blades to
prevent blade exposure.
Follow these steps to power the scanner
from a standard AC outlet.
1. Insert the AC adapter’s barrel plug into
the
DC12V
jack on the back of the
scanner.
2. Plug the adapter into a standard AC
outlet.
Using Vehicle Battery Power
You can power the scanner from a vehicle’s
12V power source (such as cigarette-lighter
socket) using a 12V, 300-mA DC cord and a
size M Adaptaplug™ connector (neither
supplied). Both are available at your local
RadioShack store.
Cautions:
You must use a power cord
that can carry 12V DC and at
least 300 mA. Its center tip
must be set to positive and its plug must
fit the scanner's
DC12V
jack. Using an
cord that does not meet these
specifications could damage the
scanner or the cord.
• Always connect the DC cord to the
scanner before you connect it to the
power source. When you finish,
disconnect the cord from the power
source before you disconnect it from the
scanner.
Follow these steps to power the scanner
from a vehicle’s cigarette-lighter socket.
1. Connect the adaptaplug connector to
the DC cord so the tip reads positive (
+
).
2. Insert the DC cord’s barrel plug into the
DC12V
jack on the back of the scanner.
!
!
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for RadioShack 200-Channel VHF-AIR-UHF at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of RadioShack 200-Channel VHF-AIR-UHF in the language / languages: English as an attachment in your email.

The manual is 0,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info