682728

Qwic Performance Series 2018 Manual

59
Zoom out
Zoom in
Previous page
1/144
Next page
59
NEDERLANDSENGLISHDEUTSCH
i
Display & Controls: Mid-drive motor models
Operation
Switching On and Off
Press the ‘
’ button on the display to start
the system. Press the same button again to put the
system in standby mode. By pressing and holding the
same button for >2 seconds, the system will turn off
completely.
Power levels
The motor assistance can be set to three different
support profiles. Use the ‘
’ and ‘ ’ buttons on the
console to select your preferred mode:
SPORT: Most powerful mode.
TOUR: Balanced power mode.
ECO: Energy saving mode.
OFF: No motor support. Display stays on.
Please note a more powerful motor support
mode will result in a lower range.
Battery indicator
The battery continuously monitors the status of the
battery and displays the remaining charge in both a
percentage (%) as a simple battery icon. In case less
than 10% capacity remains in the battery, you might
experience a decreased motor performance. The screen
will show a flashing battery icon to warn for low charge.
Even when motor support ceases because of
low battery capacity, there will still be sufficient
charge available to power the lights and display for
another 3 hours.
Lighting
By pressing the ‘
’ while the system is
turned on, the lights will be switched on. The
battery of your e-bike supplies the required power
for the lights, no additional batteries are required.
Background lighting
Thanks to the integrated light sensor the
brightness of the display is regulated depending
on the ambient light.
Walk-assist function
Press and hold the ‘
’ buon to acvate the
walk assist funcon. This will only work when
the power level OFF has been selected. In this
situaon the small arrow next to the speed
indicaon is displayed. The walk-assist funcon
is intended to use while walking alongside the
bicycle. Use this funcon for example to get your
bicycle up a ramp.
… 59 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Qwic Performance Series 2018 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Qwic Performance Series 2018 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 10,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info