806104
18
Zoom out
Zoom in
Previous page
1/48
Next page
18
Replacing the safety fuse in the 12V plug
CAUTION!
When inserting the new safety fuse, make sure that only the same type of fuse
(6 A) is used in the 12 V plug. Damage to the appliance caused by the use of incorrect
fuses is excluded from any guarantee or compensation.
ab
c
d ef
f
g
To replace the fuse f first turn the red compensating sleeve c a short
distance counter-clockwise and remove it from the 12V plug 2.
Use a suitable screwdriver to loosen the screw a from the upper half of the
housing b.
Remove the upper half of the housing b from the lower half of the
housing e .
Now carefully take the contact pin g out of the housing and then remove the
fuse f.
Note: If the thin metal connection inside the fuse f is broken, then the fuse f
is defective and must be replaced.
Insert a new fuse f into the recess provided and press lightly against the
contact spring.
Now insert the contact pin g back into the lower half of the housing e.
Make sure that the rear flattened end of the contact pin g touches the front
metal cap of the fuse f.
Now put the upper half of the housing e back on and fix it with the screw a.
Now put the compensating sleeve c back on and fix it by turning it briefly
clockwise until it is noticeably locked.
Operation
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Quigg GT-SF-KB-01 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Quigg GT-SF-KB-01 in the language / languages: English, Spanish as an attachment in your email.

The manual is 1.25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Quigg GT-SF-KB-01

Quigg GT-SF-KB-01 User Manual - German, Dutch, French - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info