713892
22
Zoom out
Zoom in
Previous page
1/188
Next page
ENGLISH
22 HeliX
2
Maintenance and Care
HYGIENE WHEN BEING REUSED:
When the chair is to be reused, it should be prepared carefully, and
wiped and treated with spray disinfectant on all surfaces which
could come into contact with the user.
In doing this, you must use a liquid for alcoholic quick disinfection
for medical products and medical inventory when you require a
quick effect. Please pay attention to the manufacturer’s instructions
of the disinfectant you are using.
In general, a safe disinfectant cannot be guaranteed on seams. We
therefore recommend, that you properly dispose of seat and back
slings in the case of micro bacterial contamination with active
agents according to § 6 infection protection law.
STORAGE
Please store/keep the wheelchair in a dry place.
Wheelchair pulls to one side
Check tyre pressure
Check to make sure wheel turns easily (bearings, axle)
Check the castor angle
Check to make sure both castors are making proper contact with
the ground
Castors begin to wobble
Check the castor angle
- Check to make sure all bolts are secure; tighten if necessary
(see the section on torque)
Check to make sure both castors are making proper contact with
the ground
Wheelchair / cross-tube assembly does not snap into position
in the seat saddle
Chair is still new, i.e., the seat or backrest upholstery is still very
stiff. This will improve with time.
Wheelchair is difficult to fold up
Adjustable backrest upholstery is too stiff. Loosen it accordingly.
Wheelchair squeaks and rattles
- Check to make sure all bolts are secure; tighten if necessary
(see the section on torque)
Apply small amount of lubrication to spots where movable parts
come in contact with one another
Wheelchair begins to wobble
Check angle at which castors are set
Check tyre pressure
Check to see if rear wheels are adjusted differently
Trouble-shooting
NOTE: If the wheelchair has been supplied to you free of charge it
may not belong to you. If it is no longer required follow any
instructions given by the organisation issuing the wheelchair in
order that it may be returned to them.
The following information describes the materials used in the
wheelchair in relation to the disposal or re-cycling of the wheelchair
and its packaging. Specific waste disposal or recycling regulations
may be in force locally and these should be taken into consideration
when disposal arrangements are made. (This may include the
cleaning or decontamination of the wheelchair before disposal).
Steel: Fasteners, QR axle, side frames, armrests, frame, leg rests,
push handles.
Plastic: Hand grips, castor forks, tube plugs, castor wheels,
footplates, arm pads and 12” wheel/tyre, wheels, side
guards.
Packaging: Low density polythene bag, cardboard box.
Upholstery: Woven polyester with PVC coatings and expanded
combustion modified foam.
Disposal or recycling should be done through a licensed agent or
authorised place of disposal. Alternatively your wheelchair may be
returned to your dealer for disposal.
Disposal / Recycling of Materials
Technical Data
Overall width:
With standard wheels including handrims, close mount:
HeliX
2
/ HeliX
2
Comfort: SW +20 cm
With drum brake wheels including handrims, close mount:
HeliX
2
/ HeliX
2
Comfort: SW +21 cm
Folded dimensions: (3° camber)
With standard wheels: HeliX
2
/ HeliX
2
Comfort: 40 cm
Weight in kg:
Maximum user weight:
HeliX
2
/ HeliX
2
Comfort: up to a load of 125 kg
Reinforced version HeliX
2
XL / HeliX
2
Comfort XL: up to a load of
170 kg
Weight in kg:
min. Transportation weight: 8.2 kg
Transportation HeliX
2
/ HeliX
2
Comfort SW 52 cm
(without footrest, wheels, sideguard) 9.0 kg
(depending on fittings)
max. Transportation HeliX
2
XL / HeliX
2
Comfort XL SW 60 cm
(without footrest, wheels, sideguard): 11.0 kg
(depending on fittings)
Footrest (item): 0.8 kg
Standard sideguard (item): 0.9 kg
24” rear wheels (solid) (item): 2.0 kg
The minimum / maximum values are taken from a
standard HeliX
2
SW 52 cm / HeliX
2
XL SW 60 cm.
For further details please refer to page 5.
Torque
TORQUE
Please refer to page 5 for details.
If no other information is given, the torque for M6 screws is 7 Nm.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Quickie RubiX 2 Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Quickie RubiX 2 Plus in the language / languages: English, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 3,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info