713889

Quickie Life i Manual

27
Zoom out
Zoom in
Previous page
1/96
Next page
ENGLISH
27
Life i Rev.6.0
Transit Wheels (Fig. 6.52)
Travel wheels should be used wherever your wheelchair would
be too wide if the rear wheels were used. After the rear wheels
have been removed with the aid of the quick-release axles, the
transit wheels can immediately be used to continue riding. The
transit wheels are mounted so that they are approx. 30 mm
above the ground when not in use. They are thus out of the way
when riding, transporting, or when tipping to pass over
obstacles.
CAUTION!
Without rear wheels, your wheelchair has no wheel locks.
Transit Wheels
Fig. 6.52
8.0 Name Plate
Due to our policy of continuous improvement in the design
of our wheelchairs, product specifications may vary slightly
from the examples illustrated. All weight/dimensions and
performance data are approximate and provided solely for
guidance.
Sunrise Medical complies with the EU Medical Devices
Directive 93/42/EEC
All wheelchairs must be used in accordance with
the manufacturer’s guidelines.
Sunrise Medical GmbH & Co. KG
Kahlbachring 2-4
69254 Malsch/Heidelberg
Deutschland
Tel.: +49 (0) 7253/980-0
Fax: +49 (0) 7253/980-222
kundenservice@sunrisemedical.de
www.SunriseMedical.eu
7.0 Tyres and mounting
Tyres and mounting
Solid rubber tyres are standard.
With pneumatic tyres always make sure that the tyres have the
correct air pressure, as otherwise the performance of the
wheelchair may be affected. If the tyre pressure is too low,
rolling resistance will increase, requiring more effort to move the
chair forward. Low tyre pressure also has a negative impact on
maneuverability. If the tyre pressure is too high, the tyre could
burst. The correct pressure for a given tyre is printed on the
surface of the tyre itself.
Tyres can be mounted the same way as an ordinary bicycle
tyre. Before in stalling a new inner tube, you should always
make sure that the base of the rim and the interior of the tire are
free of foreign ob jects. Check the pressure after mounting or
repairing a tyre. It is critical to your safety and to the
wheelchair’s performance that regulation air pressure be
maintained and that tyres are in good condition.
Name Plate
The nameplate is located on either the cross-tube assembly or
the transverse frame tube, as well as on a label in the owner’s
manual. The nameplate indicates the exact model designation
and other technical specifications. Please provide the following
pieces of information whenever you have to order replacement
parts or to file a claim:
• Serial number
• Order number
• Month/Year
RubiX
2
Argon2
XXX mm XXX mm
Max.XX°
XXX kg
XXXX.XX.XX
Life XXXXXX
Product Name/SKU Number.
Maximum safe slope with anti-tip tubes
fitted, Depends on wheelchair setting,
posture and physical capabilities of the
user.
Seat width.
Depth (maximum).
Load Maximum.
CE Mark
User's Guide.
Crash Tested (Option dependant)
Not Crash Tested (Option dependant)
Date of manufacture.
Serial number.
SAMPLE
Life i
XXXX.XX.XX
Life i
… 27 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Quickie Life i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Quickie Life i in the language / languages: English, Dutch, French, Italian as an attachment in your email.

The manual is 3,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info