Manual Quickie Krypton R (page 19 of 72) (English, Dutch, French)

713876

Zoom out

Zoom in

1/72

ENGLISH

19Krypton R Rev.B

Fig. 4.30

The lap belt should be fixed so that the belt sits at an angle of 45

degrees across the user’s pelvis. The user should be upright

and be as far back as possible in the seat when correctly

adjusted. The lap belt should not allow the user to slip down in

the seat.

(Fig. 4.30)

To fasten buckle:

Firmly push male buckle

into female buckle.

To release belt:

Press exposed sides of male

buckle and push towards

centre whilst gently pulling

apart.

WARNING!

• If in doubt about the use and operation of the lap belt then

ask your healthcare professional, wheelchair dealer, carer

or attendant for assistance.

• If you want to retrofit a lap belt, then please contact your

authorised Sunrise Medical dealer.

• The lap belt must be checked on a daily basis to ensure it

is adjusted correctly and free from any obstruction or

adverse wear.

• Sunrise Medical does not encourage the transportation of

any person in a vehicle using this lap belt as a method of

restraint.

Please see Sunrise Medical transit booklet for further

advice on transportation.

Maintenance:

Check lap belt and securing components at regular intervals for

any sign of fraying or damage. Replace if necessary.

WARNING

The lap belt should be adjusted to suit the end user as detailed

above. Sunrise Medical recommends that the length and fit of

the belt be checked on a regular basis to reduce the risk of the

end user inadvertently re-adjusting the belt to an excessive

length.

Fig. 4.31

Pelvic Restraint Belt...

5.0 Tyres and Mounting

Solid rubber tyres are standard.

With pneumatic tyres always make sure that the tyres have the

correct air pressure, as otherwise the performance of the

wheelchair may be affected. If the tyre pressure is too low, rolling

resistance will increase, requiring more effort to move the chair

forward. Low tyre pressure also has a negative impact on

manoeuverability. If the tyre pressure is too high, the tyre could

burst. The correct pressure for a given tyre is printed on the

surface of the tyre itself.

Tyres can be mounted the same way as an ordinary bicycle tyre.

Before installing a new inner tube, you should always make sure

that the base of the rim and the interior of the tyre are free of

foreign objects. Check the pressure after mounting or repairing a

tyre. It is critical to your safety and to the wheelchair’s

performance that regulation air pressure be maintained and that

tyres are in good condition.

6.0 Maintenance and care

• Check the tyre pressure every 4 weeks. Check all tyres for

wear and damage.

• Check the brakes approximately every 4 weeks to make

sure that they are working properly and are easy to use.

• Change tyres as you would an ordinary bicycle tyre.

• All of the joints that are critical to using your wheelchair

safely are self-locking nuts. Please check every three

months to make sure that all bolts are secure (see the

section on torque). Safety nuts should only be used once

and should be replaced after use.

• Please use only mild household cleansers when your

wheelchair is dirty. Use only soap and water when cleaning

the seat upholstery.

• You should only use genuine parts approved by Sunrise

Medical. Do not use parts from other manufacturers, that

have not been by authorised by Sunrise Medical.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Quickie Krypton R in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 2,05 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Quickie Krypton R Manual

Product: