Manual Quickie Helium (page 13 of 80) (English, Dutch, French)

713878

Zoom out

Zoom in

1/80

ENGLISH

Helium Rev.I

Seat

Fig. 4.14

Adjusting the seat height

To adjust the rear seat height release the Allen screws (1) (one

on each side), that fix the clamp to the axle stem (2). Remove

the spacer (3), to adjust the seat height by -10 mm or add the

spacer to increase the seat height by 10 mm.

Tighten the 2 Allen screws to 7 Nm. (Fig. 4.14).

NOTE:

An adjustment to the castor angle may be necessary when

adjusting the rear seat height.

Seat Sling

To tighten the upholstery, please use the straps below the

upholstery.

Options - Snoll on

Please see the separate Owners' Manual for details of

the Snoll On accessory.

Footplate Adjustment

High-mount footrest

The high-mount footrest is fitted on the inner part of the frame

and permits a higher footrest position (Fig. 4.13).

Fig. 4.13

Adjusting The Footrest

WARNING!

• Do not stand on the footboard! Even if the user is sitting in

the chair, there is still a risk of tipping over and injury.

• When transferring, do not stand on the footboard, there is a

risk of tipping over and injury.

Releasing the screw (1) will allow you to adjust the footrest to

correspond to the length of your lower leg and re-attach the

footrest. The angle of the footrest may be individually adjusted

by loosening screws (2). The side protection (3) on the footrest

prevents the feet slipping off accidentally. Make sure that after

any adjustment work, all screws are tightened correctly (see the

page on torque) (Fig. 4.11 - 4.12).

Fig. 4.11

Fig. 4.12

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Quickie Helium in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 1,99 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Quickie Helium Manual

Product: