Manual Quickie Easy Max (page 15 of 152) (English, German, Dutch, Danish, French, Italian, Portuguese, Spanish, Finnish)

713884

Zoom out

Zoom in

1/152

ENGLISH

EASY MAX 15Rev.B

Übersicht

Footplates

(Fig.5.7).

There are two types of footplates:

platform and divided. They can be

flipped up to facilitate getting in and

get ting out of your wheelchair.

Lower Leg Length

By removing the setscrews (1),

the footrest can be adjusted to fit

any lower leg length. Remove

setscrews, set tubing with footrest

in the desired position, and reinsert

and tighten the setscrews (see the

page on torque). Make sure that the compo site plastic pad is in

the proper position under the setscrew. A minimum interval of

2.5 centimeters from the ground should always be maintained.

Width Adjustment Of The Footrests

If the footrest width needs to be

adjusted, please undo the screw

(1), set the desired width, by

positioning 1, 2 or 3 spacers (2)

from outer to the inner side and

then refit the screws, (Fig. 5.7.1).

Divided and Platform Footplates

(Fig.5.8-5.10).

Footplates can be flipped up to

facilitate getting in and getting out

of your wheelchair.

They can also be tilted to six

different angles relative to a level

surface. Tighten screw (1) firmly on

the outer side. By removing the

clips (2), the footplate can be

adjusted to three different positions

toward both the front and rear.

Loosen the adjustment screw (3) to

change the horizontal position of

the footplate. For this purpose, the

footplate must be flipped up. When

finished, make sure that all screws

have been properly tightened (see

the page on torque).

A minimum interval of 2.5 centi-

meters from the ground should

always be maintained.

Übersicht

Extension for the Brake Lever

(Fig.5.6).

The extension for the brake lever can be

removed or folded down. The longer

lever helps to minimize the effort needed

to set the wheel locks.

CAUTION!

Mounting the wheel lock too close toward

the wheel will result in a higher effort to

operate. This might cause the brake lever

extension to break!

Leaning onto the brake lever extension while transferring will

cause the lever to break! Splashing water from tires might

cause the wheel lock to malfunction.

Compact Wheel Lock

Compact wheel locks are

underneath the seat sling and

are operated by pulling the wheel

locks towards the rear, in the

direction of the tyre. For the

wheel locks to operate correctly,

they must be pulled fully against

the stops, (Fig. 5.6.1).

CAUTION!

Incorrect mounting of the wheel lock will result in a higher effort

to operate.

Wheel Locks

Footplates

Fig.5.6

Fig.5.7

Fig.5.8

Fig.5.9

Fig.5.10

Fig. 5.6.1

Fig. 5.7.1

Footrests

Various footboards are available.

These can be flipped up to make

it easier to transfer to/from the

chair. They are described

individually.

Footrest And Swing Away

Latch

When fitting the footrests these

are fitted in the swung-away

position (Fig. 5.11). Then simply

turn them inwards until the

interlock engages (1). To remove

the footrests, use the lever (2)

and swing the footrest outwards

and lift off. Check that the

footrest is correctly engaged.

WARNING:

The footrests are not designed

to be used to lift or carry the

wheelchairs with an occupant.

Hanger Play Adjustment

In case of play the hanger (Fig. 5.11.1) can be adjusted in the

field. The hanger pin (1) is tapered and the play can be reduced

when the pin is unscrewed slightly.

Take the hanger off the chair in using the release mechanism.

Fig. 5.11

Fig. 5.11.1

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Quickie Easy Max in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Spanish, Finnish as an attachment in your email.

The manual is 4,65 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Quickie Easy Max Manual

Product: