Manual Quickie Attitude (page 38 of 144) (English, Dutch, French)

713899

Zoom out

Zoom in

1/144

ENGLISH

Attitude/Attitude Hybrid Rev.2.0

Attaching the drive wheel:

Make sure that all the components attached to the wheel have

been installed in accordance with the instructions and

specifications of the respective manufacturer. This relates in

particular to the brakes and the gear box. Do not forget to

reinstall the torque support [20] in the same position as it was

taken from.

Then push the wheel into the slot of the frame and tighten it

using the hub axle nuts [18] in the following sequence:

•• first tighten on the side of the gear box (diagram A)

•• then on the side of the brakes (diagram B)

In each case, the tightening torque of the two nuts is between

30 and 40 Nm.

Ensure that the tooth lock washer [19] is located beneath the

axle hub nut otherwise there is the risk of the axle hub nut [18]

coming loose.

If your wheels are equipped with a quick-release mechanism,

please observe the manufacturer’s specifications on

installation and the tightening torque.

If the wheel is correctly attached to the frame, the motor with

the end of the cable that leads to the battery can be connected.

In doing so, make sure the plug [15] is correctly aligned with

the socket [17]. The curved surfaces ([A] and [B]) must be

aligned with each other.

Then fasten all cables and leads with cable ties to the bicycle

frame and perform a final function test.

WARNING!

• Make sure the cables are laid correctly. Failure to do so

could lead to the cable getting caught in the brake disc, the

drive or the spokes and by locking the wheel cause a fall.

• Never install the motor without the torque support [20]. This

could cause a total loss (twisting off the cable). This voids all

warranty or guarantee claims.

CAUTION!

• It is essential to observe the instructions and specifications

of the manufacturer of the various components attached to

the wheel in all your installation work. This particularly

applies to the brakes, the gear box and quick-release

mechanism.

• Carry 5 cable ties with you along with your repair tool, to

securely fasten any loose cables during a trip.

• Installing or removing the drive wheel is best carried out

when the add-on bike is upside down (standing on its crank

and connecting frame). Remove the sMMI attached to the

handlebars first so that it does not get damaged.

• Always use the original gear cluster built by the bicycle

manufacturer. Using other makes may lead to restricted

function or to the gear cluster scraping the chainstays

Fig.3.18

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Quickie Attitude in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 2,33 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Quickie Attitude Manual

Product: