713899

Quickie Attitude Manual

35
Zoom out
Zoom in
Previous page
1/144
Next page
ENGLISH
35
Attitude/Attitude Hybrid Rev.2.0
Programming options by the specialist dealer:
Your specialist dealer can tailor the travel characteristics of your add-on bike to your requirements using a diagnosis and
programming software. Generally, the factory settings are ideally tailored to the respective model and do not need to be
changed. The factory settings may vary depending on your bicycle model (mountain bike / trekking).
Nevertheless, if adjustments need to be made, the following parameters can be programmed:
Speed of the pushing aid forwards: Set to 4 km/h as default.
Standard assistance level: The assistance level that is always available when the Pedelec is switched on.
Can be set in the range 0–5, the value 3 is pre-programmed as default.
sMMI standard settings: Language settings, time format (12/24 h)
sMMI lock: Optionally, the sMMI can be permanently connected to the motor. This results in
the sMMI only being operational with this one motor/system and cannot be
used with another motor.
Service interval: Depending on the specified suitable maintenance interval, this can be set or
reset by date or kilometres travelled (depending on which comes first).
Wheel circumference: To correctly display the speed and to comply with statutory requirements with
regard to speed limitation, the bicycle dealer can change the wheel
circumference. This is only necessary if the drive wheel is subsequently fitted
with a tyre which increases or reduces the original wheel circumference, or the
motor has been reassigned to a larger or smaller rim.
WARNING!
• This parameter may only be changed if the statutory requirements are complied with (max.25 km/h for add-on bikes)
and in the event of misuse this leads to the warranty and product liability being void.
• Similarly, unlawful tampering can have criminal consequences if investigated by the police.
• All changes to the travel parameters are recorded in the sMMI data storage device.
Firmware updates and relaying them to the motor and battery:
As part of product maintenance and to expand the range of functions, firmware updates are available to download to
specialist dealers from time to time. Your specialist dealer will be happy to advise you.
If you have loaded an update to your sMMI from your specialist dealer, the new firmware will install when you next start
up your add-on-bike.
To do this, proceed as follows:
•• Place the sMMI on its dock [5] as described in section 3.1.
•• The connection to the motor and battery is automatically established and instead of the start menu, a warning
note appears “firmware update is running”. A bar chart also shows the progress of the data transfer.
•• Once the data is fully transferred, the screen display automatically changes to the start menu (see section
3.2.2).
•• Check the settings stored by you in the sMMI if applicable. This may have changed as a result of the update.
CAUTION!
Do not interrupt the update process, for example, by removing the sMMI from its dock This may lead to damage.
… 35 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Quickie Attitude at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Quickie Attitude in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 2,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info