Manual Quickie Argon 2 (page 25 of 72) (English, Dutch, French)

713882

Zoom out

Zoom in

1/72

ENGLISH

Argon

Rev.1.0

Positioning Of Wheelchair Tie Down Restraints On

Wheelchair.

1. Location of the front and rear tie down labels (Fig.G - H).

2. Position of the front, (Fig.I) and rear, (Fig.J), wheelchair

tie down restraint and the tie down label.

3. Side view of tie down straps, (Fig.K).

Fig.D

Fig.E

Fig.C

PREFERED

ZONE

Occupant Restraints Instruction:

1. The pelvic restraint belt must be worn low across the

front of the pelvis so that the angle of the pelvic belt is

within the preferred zone of 30 to 75 degrees to the

horizontal.

A steeper (greater) angle within the preferred zone is

desirable i.e. closer to, but never exceeding 75degrees.

(Fig C)

2. The upper torso restraint belt must fit over the shoulder

and across the chest as illustrated Fig d and e

Restraint belts must be adjusted as tightly as possible

consistent with user comfort.

Restraint belt webbing must not be twisted when in use.

The upper torso restraint belt must fit over the shoulder

and across the shoulder as illustrated in Fig D and E.

3. The attachment points to the chair are the inner front

side frame just above the castor, and the rear side frame.

The straps are fitted around the side frames at the

intersection of the horizontal and vertical frame tubes.

(See Figs G-H-I)

4. The tie down symbol (Fig F) on the wheelchair frame

indicates the position of the wheelchair restraint straps.

The straps are then tensioned after the front straps have

been fitted to secure the wheelchair.

Fig.F

Transportability

Fig.H

Fig.I

Fig.J

Fig.G

Fig.K

Minimum User Weight

When the user being transported is a child, less than 22Kg

mass and the vehicle involved has less than eight (8) seated

passengers it is recommended that they be transferred to an

UNCE Regulation 44 compliant child restraint system (CRS).

This type of restraint system provides a more effective

occupant restraint system than the conventional 3 point

occupant restraint system and some CRS systems also

include additional postural supports to assist in maintaining

the position of the child when seated.

Parents or care providers may consider the option, in some

circumstances, for their child is to remain in their wheelchair

whilst in transport due to the level of posture control and

comfort provided by the set up in the wheelchair.

We would recommend in such circumstances that a risk

assessment be carried out by your healthcare professional

and relevant competent persons.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Quickie Argon 2 in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 1,74 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Quickie Argon 2 Manual

Product: