713882

Quickie Argon 2 Manual

12
Zoom out
Zoom in
Previous page
1/72
Next page
12
ENGLISH
Argon
2
Rev.1.0
2.0 Handling
Quick-Release Axles On Rear Wheel
The rear wheels are equipped
with quick-release axles.
The wheels can, therefore, be
installed or removed without
using tools.
To remove a wheel, simply
depress the quick-release
button on the axle (1) and pull it
out (Fig.2.2).
CAUTION !
Hold the quick-release button on the axle depressed when
inserting the axle into the frame to mount the rear wheels.
Release the button to lock the wheel in place. The quick-
release button should snap back to its original position
Step Tubes
Step Tubes
Step tubes are used by attendants to push a wheelchair
over an obstacle. Simply step on the tube to push a
wheelchair, for example, over a kerb or step, (Fig.4.0).
WARNING!
Sunrise Medical strongly reccommends the use of a step
tube on any model where attendant use is the
predominant intended use. Damage to the backposts may
occur if you constantly use the backpost without a step
tube, as a lever to pull back on to tip the wheelchair.
Fig. 2.2
1
Transporting The Chair
Removing the rear wheels will keep the chair as compact
as possible. The backrest can be folded down by pulling
the cord (1) (see picture 3) located on the backrest
(Fig.3.0-3.1).
Getting Into Your Wheelchair On Your Own
• Push the wheelchair to a wall or a solid piece of
furniture.
• Apply the brakes;
• The user can lower themselves into the wheelchair;
• Then position the feet in front of the heel straps
(Fig.2.0).
Getting out of your wheelchair on your own
• Apply the brakes;
• With one hand on the wheel or side guard, the person
should lean forwards slightly, to transfer the body weight
to the front edge of the seat and then push up to an
upright position with both feet firmly on the floor and one
foot behind the other (Fig.2.1).
Fig. 2.0
Fig. 2.1
Fig. 3.0
Fig. 3.1
3.0 Transporting the chair
4.0 Options
Fig. 4.0
CAUTION !
When folding the backrest down, please make sure that
your fingers do not get caught.
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Quickie Argon 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Quickie Argon 2 in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 1,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info