713895
14
Zoom out
Zoom in
Previous page
1/120
Next page
930493 Rev. A
14
ENGLISH
FIXED BA
CK– 1/4" Offset (Fig. D)
1. Remove screw (2), nut (3) and eccentric washer (4) from backplate /
backrest assembly.
2. Aluminum– Swap the 1-3/4" long screw (2) for a 1-7/8" long screw
(2A).
Titanium– Swap the 1-7/8" long screw (2) for a 2" long screw (2A).
3. Choose the side guard height by aligning one of the holes in the side
guard, with the holes in the backplate (1), plastic saddle offset (5)
and backrest tube.
4.
Aluminum– Insert 1-7/8" long screw (2A) through the side guard
(6), plastic washer (7), eccentric washer (4), backplate (1), plastic
saddle offset (5) and backrest tube. Attach nut (3).
Titanium– Insert 2" long screw (2A) through the side guard (6),
plastic washer (7), eccentric washer (4), backplate (1), plastic saddle
offset (5) and backrest tube. Attach nut (3).
5. Align slot in side guard with hole in seat frame.
6. Insert a 2" long screw (8) through side guard bushing (9), plastic
washer (7), sideguard slot, 2 plastic washers (7), plastic saddle offset
(5) and seat frame. Attach nut (3).
7. Secure screws (2A & 8) and nuts (3).
8. Repeat procedure for opposite side.
FIXED BA
CK– Zero Offset (Fig. C)
1. Remove screws (2 & 2C), nuts (3) and eccentric washer (4) from
backplate / backrest assembly
2. Aluminum– Swap the 1-3/4" long screw (2) for a 1-7/8" long screw
(2A), and the two 1-7/8" long screws (2C) for two 2" long screws
(2D). Swap the step saddle (5) for the small saddle (5A).
Titanium– Swap the 1-7/8" long screw (2) for a 2" long screw (2A),
and the two 1-7/8" long screws (2C) for two 2" long screws (2D).
Swap the step saddle (5) for the small saddle (5A).
3. Choose the side guard height by aligning one of the holes in the side
guard, with the holes in the backplate (1), plastic washer (7), plastic
saddle (5A) and backrest tube.
4. Aluminum– Insert 1-7/8" long screw (2A) through the eccentric
washer (4), backplate (1), plastic washer (7), side guard (6), plastic
saddle (5A) and backrest tube. Attach nut (3).
Titanium– Insert 2" long screw (2A) through the eccentric washer
(4), backplate (1), plastic washer (7), side guard (6), plastic saddle
(5A) and backrest tube. Attach nut (3).
5. Aluminum– Insert 2" long screw (2D) through the backplate (1),
offset plastic saddle (5) and backrest tube. Attach nut (3).
Titanium– Insert 1-7/8" long screw (2B) through the backplate (1),
offset plastic saddle (5) and backrest tube. Attach nut (3).
6.
Insert 2" long screws (2D) through the backplate (1), plastic washers
(8), plastic saddles (9) and seat frame tube. Attach nuts (3).
7. Align slot in side guard with hole in seat frame.
8. Insert 1-7/8" long screw (11) through side guard bushing (12), plastic
washer (7), sideguard slot, 2nd plastic washer (7), plastic saddle (5A),
and seat frame. Attach nut (3).
9. Secure screws (2A, 2D & 11 ) and nuts (3).
10. Repeat procedure for opposite side.
Figure C – Fixed Back, Zero Offset
Figure D – Fixed Back, 1/4" Offset
Backrest
Tube
Seat
Frame
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Quickie All Court Ti at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Quickie All Court Ti in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 4,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info