Manual Quick mill Monza Deluxe (page 7 of 16) (English)

635668

Zoom out

Zoom in

1/16

Monza Deluxe Super Automatic Espresso Machine

 Before using the machine, your water

should be tested for hardness. This is

important to help prolong the life of the

machine and keep it in proper working

order.

 If your water is above 3 grains/50 ppm of

hardness then the use of an in tank

softener for reservoir use or a softening

system if you are hooking the machine

to a water line is recommended.

 The machine comes with a raised

platform which requires the feet to be

screwed into the base of the platform.

The machine can be operated with or

without the platform, but is required if the

machine is going to be hooked up to a

drain system.

 Remove the machine from its packaging

and place on a level surface. Remove

the power cord and cup pedestal from

the water reservoir and grounds drawer.

 Rinse the water reservoir out and fill with

softened water and then carefully place

into the machine. (Not dishwasher safe)

 Install the power cord into the receptacle

in the back of the machine.

 For reservoir use ensure the toggle

VZLWFKRQWKHEDFNLVLQWKH³7$1,&$´

position.

 Turn on the main power switch on the

back of the machine.

 Press the power button on the front

touchpad to turn the machine on.

 When the dLVSOD\UHDGV³0DFKLQH

5HDG\´ you are ready to make espresso.

 To turn the machine off hold the power

button and then hold the exit button at

the same time until it powers down.

 For direct connect installation the use of

a filter system is recomended. The direct

connect kit is set up ZLWK D ´ -RKQ

Guest quick connection for easy set up.

 Unscrew the cap fitting from the back of

the machine labeled as 3 in diagram 4.3.

 Place the fiber washer in between the

braided water line and the direct connect

fitting on the back of the machine and

then screw the braided line on with a

wrench. No teflon tape is needed.

 Hook the regulator up to your water

supply with 1/4 tubing (not provided) The

regulator has been set prior to shipping

and should not require any adjustment.

 Turn the water supply on and verify

there are no leaks.

 Flip the toggle switch on the back of the

PDFKLQHWRWKH³5(7(´SRVLWLRQDQG

installation is complete.

 If you are using a softening system with

your machine be sure to replace or

recharge the softener as specified by the

manufacturer. Lifespan will vary based

on your waters hardness. Contact your

dealer if you have any questions about

water treatment.

 Depending on your water pressure, you

may experience sRPH³FKDWWHULQJ´RIWKH

braided line. To adjust the regulator, pull

the adjustment knob out and turn to

adjust, push the knob in when done to

lock setting. The regulator should only

be adjusted while water is running

through it (brewing espresso) Do not

exceed 1 bar of water pressure.

 Important: When using the machine

plumbed in there will be some residual

fresh water that is discharged into the

reservoir so it is necesary to periodically

check and empty the reservoir.

FIRST TIME SET UP

DIRECT CONNECT KIT

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Quick mill Monza Deluxe in the language / languages: English as an attachment in your email.

The manual is 1,31 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Quick mill Monza Deluxe Manual

Product: