722004
33
Zoom out
Zoom in
Previous page
1/47
Next page
Quantum Vibe www.quantumrehab.com 33
VI. OPERATION
On/Off Key
The on/off key turns the VSI on and off. See figure 23.
WARNING! Unless faced with an
emergency situation, do not use the on/
off key to stop the chair. This will cause
the power chair to stop abruptly.
WARNING! Always turn the power off
when you are stationary to prevent
unexpected movement.
Battery Condition Meter
The battery condition meter is located in front of the joystick.
See figure 23. This is a 10-segment illuminated display that
indicates that the VSI is powered on and also gives the battery
status, the VSI status and the electrical system status.
! Red, yellow and green lights lit: Batteries charged; VSI
and electrical system OK.
! Red and yellow lights lit: Charge batteries if possible;
VSI and electrical system OK.
! Red lights only lit or slow flash: Charge batteries as
soon as possible; VSI and electrical system OK.
! Rapid flash of lights: Indicates a fault in the VSI or the
electrical system.
Figure 23. VSI Controller Keypad
BATTERY CONDITION METER
MAXIMUM
SPEED/PROFILE
INDICATOR
*ACTUATOR
KEY
SPEED/PROFILE
DECREASE KEY
ON/OFF KEY
*ACTUATOR
LIGHT
*ACTUATOR
KEY
SPEED/PROFILE
INCREASE KEY
HORN
KEY
*For optional equipment on some models
*ACTUATOR
LIGHT
! Ripple side to side of lights: The joystick was not in the neutral position when the controller was turned on. If you
get “ripple side to side of lights,” turn off the controller, allow the joystick to return to the neutral position, then turn on
the controller.
NOTE: If you still get “ripple side to side of lights,” contact your Quantum Rehab Specialist.
NOTE: When the batteries approach a discharged state, the first red light will begin to slowly flash, remind-
ing you the batteries need to be charged immediately!
Speed/Profile Keys
There are two keys that control either the speed or the profile. See figure 23. This depends on how your VSI was
programmed. Press the speed/profile increase key to increase the speed or change the profile. Press the speed/profile
decrease key to decrease the speed or change the profile. The speed/profile setting is displayed on the maximum speed/
profile indicator. If your power chair was programmed with a drive profile, contact your Quantum Rehab Specialist for
more information.
NOTE: We recommend that the first few times you operate your power chair, you set the speed to the slowest
setting until you become familiar with your new power chair.
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Quantum Vibe at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Quantum Vibe in the language / languages: English as an attachment in your email.

The manual is 1,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info