722004
28
Zoom out
Zoom in
Previous page
1/47
Next page
28 www.quantumrehab.com Quantum Vibe
POSITIONING BELT
The positioning belt is designed to support the operator so that he/she does not slide down or forward in the seat, and it can
be adjusted for operator comfort. The positioning belt is not designed for use as a restraining device.
WARNING! The positioning belt is not designed for use as a seat belt in a motor vehicle. Nor is
your power chair suitable for use as a seat in any vehicle. Anyone traveling in a vehicle should be
properly belted into seats approved by the vehicle manufacturer.
To install the positioning belt:
Figure 21. Positioning Belt Installation and Adjustment
You will need the following tools:
! metric/standard hex key set
! adjustable spanner
1. Insert the screw through the washer and the mounting tab at the end of the positioning belt. See figure 21.
2. Install the screw through the spacer and the large black plastic spacer, then insert the screw through the seat base rail
at the rear of the seat.
3. Install the Nylock nut to the assembly, and then tighten the screw and nut using a hex key and an adjustable spanner.
4. Repeat steps 1-3 for the other side.
NOTE: If your power chair is equipped with an optional seating system, please refer to the user manual
provided with the seat for instruction on positioning belt installation, or contact your Quantum Rehab Spe-
cialist.
To adjust the positioning belt for operator comfort:
1. Once seated, insert the metal tab on one side of the belt into the plastic housing on the opposite side until you hear a
click.
2. Pull the excess strap attached to the metal tab until it is secure, but not so tight as to cause discomfort.
Pull to Tighten
Screw
Washer
Spacer
Nut
CLICK
Black
Plastic
Spacer
IV. COMFORT ADJUSTMENTS
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Quantum Vibe at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Quantum Vibe in the language / languages: English as an attachment in your email.

The manual is 1,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info