721966
27
Zoom out
Zoom in
Previous page
1/44
Next page

Positioning Belt
Your power chair may be equipped with a positioning
belt that can be adjusted for operator comfort. See
figure 17. The positioning belt is designed to support
the operator so that he/she does not slide down or
forward in the seat. The positioning belt is not designed
for use as a restraining device.
WARNING! The positioning belt is not designed
for use as a seat belt in a motor vehicle. Nor
is your power chair suitable for use as a seat
in any vehicle. Anyone traveling in a vehicle
should be properly belted into seats approved
by the vehicle manufacturer.
WARNING! The positioning belt should
be secured at all times. Never allow the
positioning belt to hang or drag on the floor as
Figure 17. Positioning Belt Adjustment
it may become entangled.
To install the positioning belt:
1. Remove the rearmost screw that holds the seat hinge to the seat base on both the left and right seat
hinges.
2. Insert the screw through the supplied washer, through the positioning belt and into the seat base for
each side of the power chair seat.
3. Tighten both screws.
To adjust the positioning belt for operator comfort:
4. Once seated, insert the metal tab on one side of the belt into the plastic housing on the opposite
side until you hear a click. See figure 17.
5. Pull the excess strap attached to the metal tab until it is secure, but not so tight as to cause discomfort.
To release the positioning belt:
6. Press the push button mechanism on the plastic housing.
MANDATORY! Make sure the positioning belt is properly secured to the power chair and is adjusted
for operator comfort before each use.
MANDATORY! Inspect the positioning belt for loose parts or damage, including tears, worn spots,
bent hardware, damaged latch mechanisms, dirt or debris, before each use of the power chair. If you
discover a problem, contact your Quantum Rehab Provider for maintenance and repair.
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Quantum Q6 Edge HD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Quantum Q6 Edge HD in the language / languages: English as an attachment in your email.

The manual is 4,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Quantum Q6 Edge HD

Quantum Q6 Edge HD User Manual - Dutch - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info