721966
15
Zoom out
Zoom in
Previous page
1/44
Next page

Fender Lights (Optional)
Your power chair may be equipped with fender lights. The lights are composed of three white LEDs in the
front and three red LEDs in the rear and are mounted on the fenders of your power base. See figure 5.
NOTE: Prior to initial use, ensure that the fender light switch is connected. See figure 1.
NOTE: If your power chair is equipped with an attendant control, the fender lights will activate
using the controller/single switch combination when the controller is turned on.
The fender lights are available in two version:
Operating through the controller/single switch combination
Operating through only a single switch
To activate the fender lights unsing the controller/single switch combination:
1. Turn on the power to the controller.
2. Deflect the joystick in any direction.
To deactivate the fender lights using the controller/single switch combination:
1. Turn off the power to the controller OR press the single switch.
NOTE: If the single switch is used to turn off the lights, the single switch must be used to turn
the lights back on before the lights will operate through the controller.
When the power chair is turned off, the fender lights will reset to the automatic on/off feature, if your
power chair is so equipped.
If operated through the controller/single switch combination, the fender lights will turn on when the
power chair is turned on and the joystick is deflected in any direction. The power chair must remain
powered on for the lights to stay illuminated. When the power chair is turned off, the lights will turn off.
NOTE: Turn off fender lights when the power chair is not in use to optimize power chair
performance per charge.
To operate the fender lights using only a single switch version:
1. Press the single switch once to activate the fender lights.
2. Press the single switch again to deactivate the fender lights.
NOTE: The single switch is mounted using the provided fabric fastener. The location of the
single switch should be convenient and functional for the power chair user. Possible locations
include on an armrest, the side rail, the controller, or the headrest.
NOTE: Placing the single switch on the outside of the power chair, for example, on the side rail,
may increase the overall width of the power chair.
WARNING! The single switch should be mounted in a location that is convenient for the power chair
user and where the switch harness will not be caught in drive tires or running gear, pinched in the
seat frame, or damaged when passing through doorways.
1
4
2
1
7
7
3
5
6
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Quantum Q6 Edge HD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Quantum Q6 Edge HD in the language / languages: English as an attachment in your email.

The manual is 4,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Quantum Q6 Edge HD

Quantum Q6 Edge HD User Manual - Dutch - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info