721958
17
Zoom out
Zoom in
Previous page
1/36
Next page

Comfort Adjustments
Comfort Adjustments
After becoming familiar with your power chair’s operation, you may find the need to make some
adjustments to increase your comfort, such as seat height and angle, armrest width, angle and height,
and controller position.
NOTE: If your power chair is equipped with a TB-Flex Seat, a Synergy Seat, or TRU-Balance® 3
Power Positioning System, refer to the seat adjustment information contained in separate
manuals.
WARNING! The center of gravity of your power chair was factory set to a position that meets the needs of the
demographic majority of users. Your Quantum Rehab Provider has evaluated your power chair and made any
necessary adjustments to suit your specific requirements. Do not change your seating configuration without
first contacting Quantum Rehab or your Quantum Rehab Provider.
WARNING! Some power chair components are heavy. You may need assistance to lift or carry them. Please
refer to the product specifications sheet for specific component weights before you disassemble the
power chair.
WARNING! Remove the occupant from the power chair before making any adjustments.
You may need the following to make comfort adjustments:
metric/standard socket set and ratchet
adjustable wrench
metric/standard hex key set
thread lock
Seat Height and Seat Angle Adjustment
If your power chair is not equipped with a transit securement system, you can change the seat height to
one of three positions by raising the front and rear trapeze bars. If you raise or lower only one trapeze
bar (front or rear), you can also change the seat base angle (dump).
MANDATORY! If your power chair is equipped with a transit securement system and any adjustment to the seat
height or seat angle is necessary, contact your Quantum Rehab Provider. These comfort adjustment can only
be made by a Quantum Rehab Provider.
To change the seat height:
1. Turn off the power to the controller.
2. Make sure the power chair is in drive mode.
3. Unplug the controller connector(s) from the power base. See figure 1.
4. Flip up the seat latch safety. See figure 7.
5. Squeeze the seat latch and release the seat from the front trapeze bar.
6. Slide the seat forward and remove it from the power base.
7. Remove the hardware that attaches the trapeze bars to the seat interface weldments. See figure 11.
8. Move the trapeze bars up or down to the desired height.
NOTE: Change the seat dump by raising or lowering only one trapeze bar (front or rear).
9. Reinstall the hardware.
10. Reinstall the seat.
11. Reconnect the controller to the power base.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Quantum Aspen at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Quantum Aspen in the language / languages: English as an attachment in your email.

The manual is 7,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Quantum Aspen

Quantum Aspen User Manual - German - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info