721968
11
Zoom out
Zoom in
Previous page
1/28
Next page
11
Prevent controller harness damage! Avoid routing the
controller harness on the outside of the armrest pad.
Route the harness under the armrest or toward the
inside of the armrest pad. Use correct tie-down points for
controller harness to prevent the harness from getting
caught in the drive tires, pinched in the seat frame, or
damaged when passing through doorways.
5. Plug the controller connector into the rear of the power
base. See figure 1.
6. Secure the controller harness to the armrest receiver
with wire ties. See figure 7.
Power Chair Securement Points
The power chair is equipped with four (4) tie-down points
for the purpose of securing the unoccupied power chair
during motor vehicle transport. Each tie-down point is clearly
labeled for this purpose.
To secure a power chair equipped with tie-down points:
Always secure the power chair in a forward-facing
position in the vehicle.
Attach the four tie-down straps to only designated,
labeled transit securement points indicated by anchor
symbols on the power chair. See figures 8 and 9.
Tighten the straps to sufficiently remove all slack.
Never attach tie-downs to adjustable, moving, or
removable parts of the power chair such as armrests,
front riggings, and wheels.
Position the anchor points for the rear tie-down straps
directly behind the rear securement points on the power
chair. The front tie-down straps should be anchored to
floor points that are spaced wider than the power chair
to provide increased stability. See figure 9.
The power chair should be used as indicated in the
manufacturer’s instructions. If you have any questions
about the proper use of your power chair, contact your
Quantum Rehab Provider.
ASSEMBLY
Figure 6. Controller Harness Routing on a TRU-Balance 3
Wire Ties
To Power Base
Wire Ties
Figure 7. Controller Harness Routing on a Contour Seat
Securement Brackets
(2 of 4 Shown)
Figure 8. Transit System Securement Brackets
MANDATORY!
MANDATORY!
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Quantum 4 Front at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Quantum 4 Front in the language / languages: English as an attachment in your email.

The manual is 3,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Quantum 4 Front

Quantum 4 Front User Manual - German - 24 pages

Quantum 4 Front User Manual - Dutch - 24 pages

Quantum 4 Front User Manual - French - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info