Manual Qualcast XSZ41D - 499253 (page 23 of 27) (English)

778520

Zoom out

Zoom in

1/27

Changing the oil

Tilt the lawn mower towards the oil ller, have a container ready to catch the oil, and

remove the dipstick. Once the oil has been emptied, wipe clean any spillages.

Rell with 500ml SAE 30 oil or equivalent, i.e. SAE 5W/30, SAE 10W/30). When the

dipstick is rested on the ller pipe, the oil level must be between the Min. and Max. marks

on the dipstick.

See ‘Filling with engine oil’. Do not overll.

Start the engine and allow it to run briey.

Stop the engine, wait one minute and check the oil level. Top up if necessary.

Replacing the cutting blade

WARNING! USE GLOVES.

Before you remove the grass collection bag, stop the engine and wait until the

blade stops completely.

You will need garden gloves (not provided) and a spanner wrench to remove the

blade.

Always handle the blade with care; sharp edges could cause injury.

Don’t hold the blade directly by hand.

Renew your metal blade after 50 hours of mowing or after 2 years, whichever is sooner,

regardless of condition.

Regularly check your blade. If the cut of your grass is poor, the blade might be blunt.

Damaged blades not only result in a bad cut, they cause excessive vibration and

uneconomical running of the engine. If the blade has worn excessively and become pitted

and blunt, it should be replaced or sharpened.

NOTE: The blade carrier is designed to break under heavy blade impact to protect the

machine. If this happens, also replace the blade carrier. This can be purchased from

www.gardenservicecentre.co.uk.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Qualcast XSZ41D - 499253 in the language / languages: English as an attachment in your email.

The manual is 6.07 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Qualcast XSZ41D - 499253 Manual

Product: