Manual Qualcast QSPP53 - 484348 - XSZ53D (page 10 of 15) (English)

778522

Zoom out

Zoom in

1/15

18 19

Step 4 - To stop, release the stop/start bar

Failure to start

If the engine won’t start after you have operated the starter several times, the engine

may be ooded with excess fuel. Use the following procedure to clean and start a ooded

engine:

A. Release the stop/start bar.

B. Remove the spark plug, dry it, and then reinstall it.

Install the spark plug carefully by hand, to avoid cross-threading. After the plug is seated,

tighten it 1/8 to 1/4 turns with the socket spanner to compress the washer.

C. Pull the stop/start bar towards the upper handle.

D. Operate the starter, as described in steps 2-3.

Mowing with the grass collection bag

WARNING! Always observe the strictest safety procedures when using the lawn

mower.

Start the engine and allow it to run. See ‘Step 2 - Starting the engine’.

Keep a rm grip on the upper handle and stop/start bar and push the lawn mower forward.

Walk along with it, never run with the mower. Be very careful when mowing uneven or

rough ground. Maintain a stable footing.

Mow across slopes, never up and down. Be careful when changing the direction of the

mower on a slope. Do not use the mower on a steep slope of more than 15°.

Note: The best result will be achieved if the grass is dry. Wet grass will tend to clog the

blade and the grass collection system.

Grass grows at different rates at different times of the year. Never use the lowest cutting

height for the rst cut of the season or in drought conditions. Only about one third of the

grass height should be cut at this time.

If the lawn mower will not collect the cuttings efciently, the grass discharge chute may be

blocked, the grass bag may be full, or the underside of the mower deck may be clogged.

Emptying the grass collection bag

Raise the discharge ap with one hand and remove the grass bag using its handle

with your other hand. To maintain safety, the discharge ap will close back to cover the

mulching plug when you release the ap.

Empty the grass debris in to the grass collection bag and ret the bag. If any grass residues

are caught in the discharge chute, clean it using a brush.

Mowing with the mulcher

When mulching, remove the collection grass bag, and put the plastic mulching plug into the

rear discharge chute. Then release the ap, it will close back to cover the mulching plug.

Make sure that the side discharge chute is not xed on the deck.

Note: To ensure that the cut grass can be mulched efciently, do not cut high or wet grass.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Qualcast QSPP53 - 484348 - XSZ53D in the language / languages: English as an attachment in your email.

The manual is 10.71 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Qualcast QSPP53 - 484348 - XSZ53D Manual

Product: