Manual Quadra-Fire 4300 series (page 23 of 40) (English)

815516

Zoom out

Zoom in

1/40

23 05/237037-802H

C. Firebrick

Replace the rebrick if they become crumbly and/or if there is a 1/4 inch (6.35mm) gap between the bricks.

Inspect the rebrick after each ash removal.

The rebox is lined with high quality rebrick, which has exceptional insulating properties. There is no need to use a grate;

simply build a re on the rebox oor. Do not operate appliance without rebrick.

1. After the coals have completely cooled, remove all old brick and ash from appliance and vacuum rebox.

2. Remove new brick set from box and lay out to diagram shown below.

3. Lay bottom bricks in appliance.

4. Install rear bricks on the top of the bottom bricks. Slide top of bricks under clip on back of rebox wall and push bottom

of brick back.

5. Install side bricks. Slide top of brick under clips on side of rebox and push the bottom of the brick until it is ush with the

side of the appliance.

Figure 23.2 Figure 23.5

Figure 23.3 Figure 23.6

Table 23.1

Placement Dimensions Qty Required

19” x 4.5” x 1.25” 12

26” x 4.5” x 1.25” 4

39” x 4.5” x 1.25” w/Angles 1

49” x 3” x 1.25” w/Angle 1

59” x 2” x 1.25” 2

Table 23.2

Placement Dimensions Qty Required

19” x 4.5” x 1.25” 11

24.5” x 4.5” x 1.25” 2

39” x 4.5” x 1.25” w/Angles 1

49” x 3” x 1.25” w/Angle 1

59” x 2” x 1.25” 2

66” x 4.5” x 1.25” 4

Figure 24.1

43M-ACC-C Service Part: SRV7037-003

Figure 24.4

43ST-ACC-C Service Part: SRV7037-012

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Quadra-Fire 4300 series in the language / languages: English as an attachment in your email.

The manual is 6.73 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Quadra-Fire 4300 series

Quadra-Fire 4300 series User Manual - French - 40 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Quadra-Fire 4300 series Manual

Product: