800568
8
Zoom out
Zoom in
Previous page
1/16
Next page
manual. Do not use the devise for purposes other than those specied in this
manual and the exercise guide
1. Place the unit (1) on a at level surface
2. Plug one end of the adapter (5) into the mains and the other into the power
jack (4)
3. The functions of the VIBRAPULS PRO can be selected on the control panel
on the device or on the remote control (14), as described below. The remote
control runs on 2 CR203batteries (included). Insert them into the battery
compartment by following the polarity marks.
4. To turn the device on and off, press the ON/OFF button (8)
5. When the device is on, press the “P” button (17) on the remote control to
choose one of the 8 VIBRAPULS PRO automatic programmes (P1, P2, P3, P4,
P5, P6, P7, P8). Press the “Programme” button (17) on the remote control
to choose one of the 2 manual programs (H0 and H1). To choose the pro-
gramme on the device, just press the programme buttom (P) on the device
(7). Press this button to switch from automatic to manual programmes. The
chosen setting is shown on the display panels (7).
6. See programme table
Programme table
AUTOMATIC PROGRAMMES
P1 -
Vibrate only: Range of intensity levels 6 – 15
Time : 10 minutes
P2 –
Vibration and vibration + massage
1 minute ------ vibration
2 minutes ----- vibration + massage
3 minutes ------ vibration
4 minutes ----- vibration + massage
5 minutes ------ vibration
6 minutes ----- vibration + massage
7 minutes ------ vibration
8 minutes ----- vibration + massage
9 minutes ------ vibration
10 minutes ----- vibration + massage
Range of intensity levels : 9 – 15
Time : 10 minutes
P3 –
Vibration only
Range of intensity levels : 9 – 15
Time : 10 minutes
P4 –
Vibration and vibration + massage
2 minutes------ vibration
2 minutes ----- vibration + massage
3 minutes ----- vibration
3 minutes ----- vibration + massage
Range of intensity levels : 9 – 15
Time : 10 minutes
P5 –
Vibration only
Range of intensity levels : 12 – 19
Time : 10 minutes
P6 –
Vibration + massage
Range of intensity levels : 12 – 15
Time : 10 minutes
P7 –
Vibration and vibration + massage
2 minutes------ vibration
2 minutes ----- vibration + massage
3 minutes ----- vibration
3 minutes ----- vibration + massage
Range of intensity levels : 12 – 18
Time : 10 minutes
P8 –
Vibration + massage
Range of intensity levels : 12 - 18
Time : 10 minutes
MANUAL PROGRAMMES
H0
Manual programmes, vibration only
Range of intensity levels : 1 – 20
Time : 10 minutes
H1
Manual programmes, vibration + massage
Range of intensity levels : 1 – 20
Time : 10 minutes
7. To start and stop the chosen programme press the Start/Stop button (20)
8. It is not possible to set the time of speed on automatic programmes
9. If you choose one of the two manual programmes (H0 and H1), you can set
a time of 1 up to 10 minutes before starting the programme.
Press the Less Time button (T-) (18) on the remote control or the 0 button
on the unit (13) to lower the time.
10. Once you have chosen the time, press the Start/Stop button (20) on the re-
mote control or the Start button (10) on the device. To start the programme
• Press the More Time button (T+) (16) on the remote control or the 0 button
on the unit (12) to increase the time
when the programme begins, you can set the speed from 1 to 15 at any time.
• Press the More Speed button (S+) (15) to increase the speed
• Press the Less Speed button (S-) (19) to reduce the speed
11. To turn of the device, rst press the Start/Stop button (20) on the remote
control or the the stop button on the device (11). Then press the ON/OFF
button on the device (21) to turn it completely off.
12. Disconnect the device from the mains after use.
22-265_DS_HollandAsia QLT Voetmassage manual.indd 822-265_DS_HollandAsia QLT Voetmassage manual.indd 8 19-10-2022 20:5419-10-2022 20:54
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for QLT VIBROPULSE PRO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of QLT VIBROPULSE PRO in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1.31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info