800564
5
Zoom out
Zoom in
Previous page
1/12
Next page
GENERAL SAFETY RULES
(For all battery operated tools)
WARNING
Read and understand all instructions. Fallure to follow all instructions listed below, may result in electric shock, re and /serious
personal injury.
WORK AREA
1. keep your work area clean and well lit.
Cluttered benches and dark areas invite accidents.
2. Do not operate power tools in explosive atmospheres, such as in the pres-
ence of ammable liquids, gasses, or dust of fumes
3. keep bystanders, children, and visitors away while operating a power tools.
Distractions can cause you to lose control.
ELECTRICAL SAFETY
4. A battery operated tool with intogral batteries or a separate battery pack
must be recharged only with the specied charger for the battery.
A charger that may be suitable for one type of battery may create a risk of re
when used with another battery
5. Battery operated tool can be used with specically designated battery pack.
Using any other batteries may create a risk for re.
PERSONAL SAFETY
1. Stay alert, watch what you are doing, and use common sense when operat-
ing a power tool.
Do not use tool while tired or under the inuence of drugs, alcohol, or med-
ication. A moment of inattention while operating power tools may result in
serious personal injury.
2. Dress properly. Do not wear loose, clothing or jewelry, contain long hair.
Keep your hair, clothing and gloves away from moving parts. Loose clothes,
jewelry, or long hair can be caught in moving parts.
3. Avoid accidental starting. Be sure switch is in the locked or off position be-
fore inserting battery pack. Carrying tools with your nger on the switch or
inserting the battery pack into a tool with the switch on invites accidents
4. Remove adjusting keys or wrenches before tuming the tool on.A wrench or
a key that is left attached to a rotating part of the tool may result in personal
injury.
5. Do not overreach. Keep proper footing and balancd at all times. Proper foot-
ing and balance the tool in unexpected enable better control of situations.
6. Use safety equipment.
Dust mask, safety glasses, non-skid safety shoes, hard hat,or hearing pro-
tection must be used for appropriate conditions.
TOOL USE AND CARE
1. Use clamps or other practical way to secure and support the workplace to a
stable platform. Holding the work by hand or against your body is unstable
and may lead to loss of control.
2. Do not force tool. Use the correct tool for your application. The correct tool
will do the job better and safer at the rate for which it is designed.
3 Do not use tool if switch does not turn it on or off. A tool that cannot be con-
trolled with the switch is dangerous and must be repaired.
4. Disconnect battery pack from tool or place the switch in the locked or off
position before making any adjustments, changing accessories ,or storing
the tool. Such preventive safety measures reduce the risk of starting the tool
accidentally.
SCOPE OF APPLICATION
Cutting trees in orchards, pruning branches in municipal gardens, cutting bam-
boo, chopping rewood at home, necessary for outdoor leisure and personal
protective equipment.
LITHIUM ELECTRIC CHAIN SAW
22-252 HollandAsia Kettingzaag MANUAL.indd 522-252 HollandAsia Kettingzaag MANUAL.indd 5 05-10-2022 14:1605-10-2022 14:16
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for QLT Mini at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of QLT Mini in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1.2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info