Manual Qlima PEP 2021E (page 18 of 34) (English, Dutch, Danish, French, Swedish)

689388

Zoom out

Zoom in

1/34

ASSEMBLING THE HEATER

The manufacturer is not responsible for any harm or damage if attention is

not paid to the points described above.

The use of this product and the elements required for that purpose is entirely

at the end user’s own risk.

INSTALLATION

Make sure to mount the appliance only on a level, horizontal, firm and stur-

dy underground.

WARNING - this appliance must be connected to an earthed power socket.

The heater is fitted with a supply cable and molded plug, therefore the ter-

minals should not be interfered with. The following points should be consi-

dered when positioning the heater:

• Please observe the minimum safe distance between the heater body and any

inflammable surfaces. (See Fig 1).

• Make sure that the indication of the different switches can be seen from a

distance of >1 mtr

• The heating lights can be vulnerable. Make sure to handle the appliance with

care. Avoid vibrations.

• Never immerse in water/liquids. Risk of death

Assembly

• Step 1: see figure 2: connect the bottom tube with base by screwing them

together.

• Step 2: see figure 3: feed the Power Cord through the base and the bottom

tube, and pull through around 1.75 – 2 m of cable.

• Step 3: see figure 4: connect the middle tube and top tube with bottom pole

by screwing them together.

• Step 4: Place the power cord plug through base, bottom tube, middle tube

and top pole. Connect the power cord plug to the socket in the heater head.

(see figure 5).

Note: make sure the connection of the power cord plugs inside the pole is

firm and cannot easily disconnect!

• Step 5: This step to be done by 2 people!

see figure 6 and figure 7: push the Heater Head onto the Top tube and fix in

position using 2 x 8mm screws

• Step 6 ** PEP 2021E only **: see figure 8: raise or retract the top tube to

the desired height and tighten to the middle tube by screwing knob down.

Before going to step 7, make sure the heater head is in its high position

• Step 7: see figure 9: Make sure the power cord is completely extracted out of

the pole.

Fix the power cord on the base by using the 2 power cord brackets and the 4

pcs M4 Screws.

• Step 8: complete! See figure 10a for PEP2021E and see figure 10b for PEP1021.

• Step 9: Fix the heater by three wedge bolts on the floor (figure 11).

• Step 10: Tightening the screws by spanner (figure 12 - 13).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Qlima PEP 2021E in the language / languages: English, Dutch, Danish, French, Swedish as an attachment in your email.

The manual is 0,4 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Qlima PEP 2021E Manual

Product: