692705
52
Zoom out
Zoom in
Previous page
1/100
Next page
52
3. USAGE:
Vacuum cool ash and dry residue only
• Always make sure the lter is installed!
When the container is full or it feels difcult to vacuum more dust, the
lter needs to be taken out and cleaned.
While vacuum the replace ash, the ash temperature must be below
40°C. Do not vacuum hot ashes for longer than 10 seconds if the re is
not extinguished! (Fig. 5).
TIP:
When suction power is reduced: carefully tap on the lid or carefully tap
container to the oor to possibly remove the blockade.
4. AFTER USAGE:
• Press the switch 13 to turn off vacuum cleaner.
• Pull out plug.
• Roll up the power cable.
• Disassemble the hose 7 from the appliance.
• Take the lid 3 from the appliance.
• Empty the container body 1 and wash it.
• Use rag to dry container body 1.
Take out the lter B / C / G and (if applicable) the metal mesh cover D,
and clean and wash it carefully (picture 6), and dry it in air before in-
stalled on vacuum cleaner. Filter and metal mesh cover can be removed
using the ‘turn anti clock wise and pull method’. For the metal mesh
cover is might be necessary to loosen the metal screws just a little bit.
Reinstall B / C / G and D (if applicable) following the ‘push and turn
clock wise method’. Make sure that the metal mesh lter is xated by
xating the relative screws.
• Replace the lid 3 and xate the locks 2
5. MAINTENANCE
The container body 1 and outer shell of lid 3 need to be cleaned fre-
quently.
Never use a detergent and/or cleaning agent as this might result in
damages
• The dirty container should wash with the clear water only.
ASZ TYPE ONLY:
Make sure that water never comes in contact with the lid, as this can
cause signicant damage and or risk with respect to the electrical parts!
• Wash the lter with the clear water only.
If the appliance working unsatisfactory, it is usually resulted from the
jam of hose 7 or conjunction of pipes, lters or accessories. In that case,
please clean the parts concerned.
G
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Qlima ASZ 1010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Qlima ASZ 1010 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info