564209

Qlima - Zibro SRE3330C Manual

72
Zoom out
Zoom in
Previous page
1/162
Next page
4
Symptoms Causes Measures to be taken
Heater doesn’t
ignite
The child safety catch lights
up
Turn the child safety catch off
The fuel in-
dicator lamp
doesn’t work
The tank is empty Fill the tank
The tank is deformed Replace the tank
Dirt particles dust or water on
the filter and / or in the fixed
tank
Clean the fixed tank and the
fuel filter.
Power loss
The fuel indicator flashes
The fuel indicator flashes Fill the tank
A poor quality fuel has been
used.
Remove the fuel from the
two tanks, then rinse with the
correct fuel.
Abnormal com-
bustion
A poor quality fuel has been
used.
Poor ventilation Ventilate regularly
Dust on the ventilator filter Clean the ventilator filter
Unpleasant
smells
A poor quality fuel has been
used
Remove the fuel from the
two tanks, then rinse with the
correct fuel.
No fuel in the tank Fill the tank
Fuel leakage or spilled fuel
Do not use any more and
contact your dealer
Fuel leakage
Move the heater, the tank is
not empty
A poor quality fuel has been
used.
AUTOMATIC DEACTIVATION
This heater is fitted with a safety system that ensures that it switches off
automatically after 36 hours continuous operation. If desired, you can switch the
heater on again by pressing the ON/OFF button
21
(see section D).
I CHILDPROOF LOCK
The childproof lock can be used to prevent children accidentally changing the
heater settings. When the heater is burning and the childproof lock is on, the heater
can only be switched off. Other functions are blocked then. If the heater has already
been switched off, the childproof lock also prevents accidental ignition of the
heater.
Activate the childproof lock by pressing the CHILDLOCK key O and holding it
down for more than 3 seconds. The childlock indicator will appear on the information
display (Fig. O), indicating that the childproof lock has been activated. Switch off the
childproof lock by pressing the CHILDLOCK key O and holding it down for more than
3 seconds once again.
J THE CORRECT USE OF ‘SAVE’
The ‘SAVE’ function allows you to limit the temperature. When this function is
activated, the heater will automatically switch off, when the room temperature exceeds
the set temperature by 3°C. Subsequently, when the room temperature has dropped
again to the set temperature, the heater will automatically switch on again.
Activate
the ‘SAVE’ setting by pressing the appropriate
22
key. The SAVE indicator light will
light up. Switch off the function by pressing the SAVE key once again.
72
O
… 72 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Qlima - Zibro SRE3330C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Qlima - Zibro SRE3330C in the language / languages: All languages as an attachment in your email.

The manual is 6,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info