633111
76
Zoom out
Zoom in
Previous page
1/176
Next page
1. Togliere il coperchio del vano portabatterie del telecomando spingendo nel verso indicato dalla freccia
stampata sul coperchio.
2. Inserire le nuove batterie facendo attenzione a rispettare la corretta polarità (+) positivo e (-) negativo.
3. Rimettere a posto il coperchio.
G
NOTA!
Quando vengono rimosse le batterie, il telecomando cancella tutte le impostazioni
programmate. Dopo avere inserito batterie nuove, è necessario riprogrammare il telecomando.
Nel sostituire le batterie, non utilizzare batterie esaurite o di tipo differente. Ciò potrebbe
pregiudicare l’efficienza del telecomando.
Se il telecomando rimane inutilizzato per alcune settimane, rimuovere le batterie dal suo
interno. In caso contrario eventuali perdite di liquido elettrolitico potrebbero causare danni al
telecomando.
La durata media di una batteria in condizioni normali d’impiego è di circa 6 mesi.
Sostituire le batterie se l’unità interna non emette il segnale acustico o se l’indicatore del
segnale non si accende.
Non mischiare mai una batteria esaurita con una nuova. Non usare mai congiuntamente tipi
diversi di batterie (per esempio batterie alcaline con batterie al biossido di manganese)
FUNZIONAMENTO AUTOMATICO
Se il climatizzatore è pronto per entrare in funzione (controllare che l’unità sia collegata e che l’alimenta-
zione elettrica sia disponibile), accendere l’apparecchio e la spia luminosa di FUNZIONAMENTO sul display
inizia a lampeggiare.
1. Utilizzare il selettore della Modalità per selezionare AUTO.
2. Premere il tasto + o - per impostare la temperatura desiderata.
3. Premere il tasto On/off (accensione/spegnimento) per avviare il climatizzatore. Sul display si accende la
spia luminosa di FUNZIONAMENTO. La modalità operativa attiva è AUTO. La VELOCITÀ della ventola è
regolata automaticamente.
4. Ripremere il tasto On/off (accensione/spegnimento) per disattivare l’apparecchio.
G
NOTA!
Nella modalità AUTO il condizionatore selezionerà automaticamente la modalità di
funzionamento Raffreddare, Ventilare o Riscaldare, a seconda della differenza rilevata tra la
temperatura ambiente reale nella stanza e la temperatura impostata sul telecomando.
Se la modalità AUTO non offre il comfort desiderato, vi è sempre la possibilità di scegliere
manualmente un’altra modalità.
Funzionamento in modalità REFRIGERAZIONE, RISCALDAMENTO e Solo VENTILAZIONE
1. Nel caso in cui la modalità AUTO non sia rispondente alla esigenze di comfort è possibile ignorare le
impostazioni automatiche e selezionare manualmente le altre modalità disponibili: REFRIGERAZIONE,
DEUMIDIFICAZIONE, RISCALDAMENTO o Solo VENTILAZIONE, agendo sul tasto b.
2. Premere il tasto + o - (c e d) per impostare la temperatura ambiente desiderata.
3. Premere il tasto e Ventola per selezionare la modalità VENTILAZIONE alle velocità AUTO, ALTA, MEDIA
o BASSA.
4. Premere il tasto On/off (accensione/spegnimento) a. La spia luminosa del funzionamento si accende
ed il climatizzatore inizia a funzionare secondo la modalità prescelta. Ripremere il tasto On/off (accen-
sione/spegnimento) a per disattivare la funzione.
>
76
76


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Qlima - Zibro S3364 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Qlima - Zibro S3364 in the language / languages: English, Dutch, Danish, French, Italian, Polish, Swedish, Norwegian as an attachment in your email.

The manual is 5,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info