14
Adjusting the display
You can adjust the brightness and time-out duration of the display for when the unit is
switched on and in standby. To change display options:
1. Press Menu, scroll to ‘Display settings’ and push the Tune dial.
2. Now choose either ‘Active’ to change settings that apply when the unit is
switched on, or ‘Standby’ to change settings that apply in standby.
Changing the display time-out duration
Select ‘Duration’ and choose from the following two modes:
Always on
The screen is always set to your preferred brightness level.
Timed off The screen is set to your preferred brightness level when a button is
pressed and then switches off after 7 seconds of inactivity.
Changing your preferred brightness level
Select ‘Brightness’ and choose from the following options:
Automatic
The brightness of the screen adjusts automatically depending on the
level of light in the room (default).
1–10
Turn the Tune dial to vary the brightness level between 1 (very dim)
and 10 (very bright) and push to confirm your preferred setting.
Set clock
You can manually set the time and date if required. If you have a digital radio signal
and/or a strong FM radio (RDS) reception these will be updated automatically.
EvokeMio_DG_manual-Euro.indb 14 7/25/2013 5:24:10 PM
