489402
41
Zoom out
Zoom in
Previous page
1/45
Next page
41
Universal options EVOKE Flow Owner’s Manual v1.0
To adjust the screen brightness
By default, the display brightness is set to ‘Automatic’ in active and standby, which means that the
brightness adjusts to suit the lighting level in your room. If you want to change this setting, follow the
instructions below:
1 Tap O Options and highlight and select ‘Display’.
2 Highlight ‘Active operation’ to adjust the display settings that apply when the radio is switched
on or ‘Standby operation’ to adjust the display settings that apply in standby.
3
Highlight and select ‘Brightness’.
4
Rotate the Select dial to adjust the brightness from 1 (low) to 10 (high) and tap O OK to confirm.
Note
You can toggle the brightness between O Automatic (light sensor) and O Manual.
7.5 Upgrade your radio’s firmware
Firmware upgrades may be issued in the future to provide exciting new features. You can check if a
firmware upgrade is available and download the upgrade over your wireless network. Alternatively,
you can connect EVOKE Flow to your PC using a USB cable (A-to-mini-B type, not supplied) and
download the firmware upgrade manually from www.pure.com/support.
To upgrade over your wireless network (recommended)
1 Tap O Options; highlight and select ‘Additional settings’; select ‘Upgrade’; and select ‘Wi-Fi’.
2 EVOKE Flow will search for any available upgrades.
3 If an upgrade is available the message ‘New version available: v1.x’ will appear on screen. In
the event that older softwar
e upgrades, which have been superceded by the new upgrade, are
available tap O Show all to display all the available (legacy) upgrades.
4 Tap O OK to download and install the new firmwar
e, which takes 3–4 minutes.
To upgrade using a USB cable (where a wireless network is not available)
1 Visit www.pure.com/support to check to see if an upgrade is available for EVOKE Flow.
2 If an upgrade is listed on the website, download the most recent upgrade to your PC.
3 Connect EVOKE Flow to your PC’s USB port. Follow the on-screen instructions provided with
the upgrade software.
7.6 Factory reset
Resetting your radio removes all DAB and FM presets (but not your internet Favourites), clears the
DAB station list and resets all options to defaults. All your wireless networks settings will be cleared.
1. Press and hold O Options for 3 seconds to display the ‘Factory reset’ menu.
2. Tap O Yes to confirm the reset or O No to cancel, or wait 7 seconds for the screen to time-out.
Note
If you only want EVOKE Flow to forget all wireless networks, not your other settings, you
can select ‘Clear network settings’ in the ‘Wi-Fi settings’ menu.
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pure Evoke Flow at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pure Evoke Flow in the language / languages: English as an attachment in your email.

The manual is 2,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pure Evoke Flow

Pure Evoke Flow User Manual - German - 132 pages

Pure Evoke Flow User Manual - German - 45 pages

Pure Evoke Flow User Manual - Dutch, Danish, French, Italian - 132 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info