489402
21
Zoom out
Zoom in
Previous page
1/45
Next page
21
Listening to Internet Radio and more EVOKE Flow Owner’s Manual v1.0
Note Depending on your wireless network configuration, entering only the password may not be
sufficient to connect. If this is the case, EVOKE Flow will try to connect to your network and
then display the ‘Unable to connect’ menu. If this happens, highlight and select ‘Change key
or password’ and try entering the full WEP, WPA or WPA2 encryption key and tap O Save.
2 Wait for EVOKE Flow to connect to your wireless network, which may take a minute or two.
Finally, enter your registration code for the Lounge*
1 When you see the Registration screen tap O Enter and enter your registration code, which was
sent to your e-mail address when you connected your radio to the Lounge
(www.thelounge.com). Rotate the Select dial to highlight characters and push to select; tap
O Delete to erase characters (press and hold to erase all); and tap O Save to finish.
2 Wait for a moment until you see the Lounge home screen. Well done! The world of internet
radio is now at your fingertips: read on to find out how to tune in.
Conf iguring IP...
A
Network Setup
Verifying key...
A
Setting up network
*
We recommend that you register with the Lounge and connect your radio to save over 10 Favourites and organise your
Favourites into folders. However, if you’d rather connect to the Lounge without registering, tap ‘Skip’. You can always register later
and then select ‘Register with the Lounge’ from the Lounge options menu to enter your registration code.
If you see the message ‘Unable to connect’ highlight and select one of the following options:
Retry connection Attempts to reconnect to the selected network using the same
encryption key or password.
Select another network Re-scans and displays the list of visible wireless networks again. You
can select a new one if, for example, you’ve moved EVOKE Flow from
one location to another, eg, from home to the office.
Change key or password Allows you to enter a new WEP or WPA/WPA2 key or password if you
think you’ve made a mistake. Once you’ve done this, select ‘Retry
connection’ to try to connect with the new key/password.
Change encryption mode Change the encryption mode between ‘WEP’, ‘WPA (PSK)’, ‘WPA2
(PSK)’ or ‘None’. EVOKE Flow automatically detects the encryption
mode for your network, but you can change this option and then
select ‘Retry connection’ if you think the mode is specified incorrectly.
Change IP configuration Choose between ‘DHCP’ or ‘Static’ (see IP address)
“Help! I see Unable to connect
Please register at
www.thelounge.com
for a registration code.
Tap Enter to enter code.
Skip Enter
My favourites
Stations
Listen again
Podcasts
PURE sounds
ABCDE FGHIJKLM
NOPQRSTUVWXYZ
sp0123456789
Enter registration code
Del Save More...
–YOUR CODE –
Lounge home screen
Entering a
registration
code
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pure Evoke Flow at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pure Evoke Flow in the language / languages: English as an attachment in your email.

The manual is 2,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pure Evoke Flow

Pure Evoke Flow User Manual - German - 132 pages

Pure Evoke Flow User Manual - German - 45 pages

Pure Evoke Flow User Manual - Dutch, Danish, French, Italian - 132 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info