643488

Pure Evoke C-F6 Manual

19
Zoom out
Zoom in
Previous page
1/164
Next page
17
EN
EN
Setting an alarm
Evoke has two alarms which can switch the radio on and tune to a digital or FM radio station, play a CD or
sound an alarm tone.
1. Press the
1
button.
2. Turn and press the Select dial to select ‘Alarm 1’ or ‘Alarm 2’.
3. Turn the Select dial to scroll through each alarm setting. If you want to change a setting, press the
Select dial. You can set the following alarm options:
Enable: Turn and press the Select dial to choose when you want the alarm to repeat. The available
options are ‘Daily’, ‘Once’, ‘Weekends’ or ‘Weekdays’.
Time: Turn and press the Select dial to adjust the hour of the alarm. Note: If you have set your Evoke
to use the 12 hour time format, make sure that you select the ‘AM’ or ‘PM’ version of the hour before
pressing the Select dial. Repeat to set the minutes of the alarm.
Mode: Turn and press the Select dial to choose between ‘Buzzer’, ‘Internet radio’, ‘DAB’, ‘FM’
or ‘CD’. Note: If you select ‘CD’ as the alarm source and there is no CD in Evoke when the alarm
sounds, the ‘Buzzer’ will sound instead.
Preset: If you have set your alarm to tune into an internet, digital or FM radio station, turn and press
the Select dial to choose between the last radio station you were listening to or one of the stations in
your preset list.
Volume: Turn and press the Select dial to set the volume of Evoke when the alarm sounds.
Save: Turn and press the Select dial to save the alarm.
Evoke’s display will show the
DAB STATION DETA
DLS SCROLLING IN
or
DAB STATION DETA
DLS SCROLLING IN
icon to show that the alarm has been set.
Cancelling a sounding alarm
To cancel a sounding alarm, press any button except the Select dial. If you press the Standby button
during a sounding alarm, Evoke will enter standby.
Snoozing a sounding alarm
To snooze a sounding alarm, press the Select dial. Evoke’s display will show the snooze countdown timer and
the alarm icon
(
DAB STATION DETA
DLS SCROLLING IN
or
DAB STATION DETA
DLS SCROLLING IN
)
will flash to show how long the alarm will snooze for. By default, Evoke snoozes an
alarm for 5 minutes. To change the default snooze time see page 7.
Setting the sleep timer
Evoke has a sleep timer that switches your Evoke into standby after a set time period. To set the sleep
timer:
1. Press the Menu button.
2. Turn and press the Select dial or use the <Select> buttons on the remote control to choose ‘Main
menu’ and then choose ‘Sleep’.
3. Tu
rn the Select dial
or use the < > buttons on the remote control
to increase the duration of the sleep
timer from 15 to 60 minutes. Press the Select dial or the Select button on the remote control to start the
sleep timer.
Evoke’s display will show the sleep icon when the sleep timer is active.
Alarms and timers
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pure Evoke C-F6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pure Evoke C-F6 in the language / languages: English, German, Dutch, Danish, French, Italian, Norwegian as an attachment in your email.

The manual is 16,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info