529186
15
Zoom out
Zoom in
Previous page
1/24
Next page
12
DAB Tuning aid
This provides a signal level display which you can use to find the best position for your radio and aerial for DAB radio.
When you select this option, the bottom line of the display shows the channel identifier and frequency. See page 15 for
useful addresses which you can contact to find the channel identifier for a multiplex you want to receive.
1. Turn the Tune knob to scroll through different channels and push the Tune knob to select one. Note The list
includes all channels, UK stations are in the range 11B to 12D. You see a signal level display. The empty block
indicates the minimum required level for reception and the solid blocks indicate the current level.
2. Move your aerial or radio whilst watching the display and to try to raise the current level to the empty block or
beyond. The display will change to show the multiplex name on the bottom line of the display once a good signal is
received and the multiplex will be added to the service list.
3. Push the Setup button to exit the tuning aid or turn the Tune knob to select another channel.
Note You can also display the signal level for any DAB station you are listening to by pushing the Tune button.
DRC Value
DRC (Dynamic Range Control) enables you to alter the dynamic range of the received DAB audio (dependent
on broadcast material) by making the quieter sounds in a broadcast more audible. This may be useful in noisy
environments or particularly quiet parts of programmes. The DRC level of a broadcast is set by a broadcaster and
transmitted with the service. Changing this DRC value enables you to apply a scaling factor to this level.
When you select this option you see the current DRC value on the top line of the display and a scroll list on the bottom.
Turn the Tune knob to scroll through the following options and push the Tune knob to select one:
DRC 0 DRC scaling is switched off.
DRC ½ DRC scaling is set to ½ that sent with the transmitted service.
DRC 1 Applies the DRC scaling as sent with the transmitted service. This is the default setting.
Sw version
This option enables you to view the version number of the software installed in your EVOKE-2. You may be asked to
quote this if you contact Technical Support for advice. This option can only be viewed, no adjustment is available.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pure Evoke 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pure Evoke 2 in the language / languages: English as an attachment in your email.

The manual is 0,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pure Evoke 2

Pure Evoke 2 User Manual - German - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info