529185

Pure Evoke 1XT Marshall Manual

5
Zoom out
Zoom in
Previous page
1/8
Next page
5
Setup options
Press the Menu button, turn the Tune knob and push to select alarm settings or one of the following setup options.
Station order
Changes the order of your station list. Select one of the following options:
Alphanumeric Displays all stations in alphanumeric order.
Fav station Displays your six most listened to stations at the top of the station list and the rest below, in
alphanumeric order. Your favourite stations are displayed with a
♥
next to their names.
Active station Displays active stations at the top of the station list and inactive ones at the bottom in alphanumeric
order. Inactive stations are those on the station list but not currently available, marked with a ’?’.
Multiplex Lists stations in groups according to their multiplex. Multiplexes or ensembles are groups of stations
owned and broadcast by a single operator.
Trim stn. list Removes inactive stations from the station list.
♥
→ presets Available only when Fav station order (above) has been selected. Transfers your favourite stations to
the six preset buttons.
Tuning aid
Provides a signal level display which you can use to find the best position for your radio and aerial.
1. Select a DAB channel (UK stations are in range 11B – 12D). You see a signal level display. The empty block shows
the minimum level for good reception and the filled blocks show the current level.
2. Move your aerial while watching the display and to try to raise the current level to the empty block or beyond.
Once you have a good signal the display will show the multiplex name and add the stations to the station list.
3. Push the Menu button to exit the tuning aid or turn the Tune knob to select another channel.
Note You can also display the signal level at any time for a station you are listening to by pushing the Tune knob.
DRC value
DRC (Dynamic Range Control) value makes the quieter sounds in a broadcast easier to hear at low volume or in
a noisy environment. The DRC level of a broadcast is set by the station and sent with the signal. Check with the
broadcasters to find out if they use DRC on their stations. Select one of the following options:
DRC 0 DRC is switched off. Any DRC level broadcast will be ignored. This is the default setting.
DRC ½ DRC level is set to ½ that sent with the broadcast.
DRC 1 Applies the DRC level as sent with the broadcast.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pure Evoke 1XT Marshall at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pure Evoke 1XT Marshall in the language / languages: English as an attachment in your email.

The manual is 0,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info