This section gives some of the most likely solutions to problems you might have with your EVOKE-1.
I can’t get any sound
Make sure your EVOKE-1 is plugged in and switched on as explained on page 7.
Check that the volume is not set too low, see page 8 for details.
Ensure that you have completed the Autotune procedure to find digital radio stations as explained on pages 7 and 8.
Display says ‘ No stations available’
Check that your aerial is connected and fully extended. Use the Autotune facility to search for services, see pages 7 and 8. Try using the tuning
aid to adjust your aerial or radio position, see page 12.
I can’t access secondary services
At the time of publishing not many secondary services are available. If secondary services are available for the currently selected station the
secondary ‘>>’ indicator will be shown on the display next to the station name, see page 9.
Display says ‘Station off-air’
This may occur if a broadcaster takes a station off-air whilst you are listening to it. If your radio is tuned to a secondary service EVOKE-1
re-tunes to the associated primary service. If tuned to a primary service, EVOKE-1 will wait until the service resumes or you can choose a new
station.
I can’t hear the station I have selected on the display
The top line of the display shows the currently selected station. To change station you need to scroll the station list displayed on the bottom line
of the display and confirm your selection by pressing the Tune knob, as described on page 9.
I hear a ‘burbling’ sound on some stations
Although DAB is excellent at providing quality audio from very little signal, the quality can suffer if the signal strength is too low. If that happens,
a ‘burbling’ sound can sometimes be heard.
To help reduce this, check that your aerial is fully extended and upright. If the problem persists try moving your EVOKE-1 or repositioning your
aerial using the tuning aid described on page 12. See page 17 for additional advice on aerials.
For the latest troubleshooting information visit the support section on our website at www.pure-digital.com.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Pure Evoke 1 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Pure Evoke 1 in the language / languages: English as an attachment in your email.
The manual is 0,31 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
