161361
6
Zoom out
Zoom in
Previous page
1/16
Next page
4
Setting up
This section provides information on connecting your DRX-701ES to your hi-fi and connecting your aerial.
Before connecting other devices to your DRX-701ES, switch both devices off. This helps prevent electrical charge damage.
You may also want to peel off the protective film from the LCD panel at this stage.
Connecting to your amplifier
To get sound from your DRX-701ES you need to connect it to your speakers via an amplifier. This may be a stand
alone unit or it may be built into your existing hi-fi system or powered speakers.
Connect the (L)eft and (R)ight OUTPUT sockets to the Tuner-in sockets on the back of your amplifier using the
supplied stereo phono cable.
Connecting to an auxiliary source
If you have an existing radio tuner, or other auxiliary device, you can connect it through your DRX-701ES to reduce
the number of connections to your amplifier. The auxiliary device output will then be passed through the analogue
outputs to your amplifier when your DRX-701ES is switched to standby or off.
Connect the (L)eft and (R)ight INPUT sockets to the output sockets on the back of your auxiliary device using a
stereo phono cable.
Connecting to digital devices
Your DRX-701ES can provide digital audio output for connection to digital speakers, the digital input on your
amplifier or digital devices such as MiniDiscs, CD-Rs or DAT recorders.
Connect the coaxial S/PDIF or the optical S/PDIF socket to the digital-in socket on your digital device using a
suitable cable. Connecting cables are available from PURE Digital, see Accessories, page 11.
Connecting to an external decoder
The RDI (Receiver Data Interface) optical connector provides access to raw multiplex data. This may be used in the
future to connect to an external decoder or computer for access to extra services. These services may not currently
be available in your area.
Connecting to your aerial
You need to connect either the supplied aerial or an alternative DAB aerial to your DRX-701ES to receive
digital radio transmissions. For information on the types of aerials available, see Aerial advice, page 11.
For information on how to find out about DAB coverage in your area, see Guide to digital radio, page 9.
1. Screw the aerial plug onto the F-type AERIAL connector.
2. For the best reception, if using the indoor aerial supplied, attach the aerial horizontally to a wall
using some adhesive tape and extend the arms on the end of the aerial wire vertically
into a ‘T’ shape on its side, as illustrated.
Connecting to the power supply
Once all audio connections are complete, as described above, connect the power cable to the power socket on the
rear panel of your DRX-701ES and the other end to a wall power outlet.
Connecting to headphones
The Phones socket on the front panel of your DRX-701ES enables you to plug in and use a pair of headphones
instead of using an external amplifier.
Connecting to a USB device
The USB connector enables software upgrades to be performed. Fill in the appropriate section of your warranty card
to automatically receive details of when software upgrades are available and instructions on how to install them or
check our website for the latest information.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pure drx 701 es at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pure drx 701 es in the language / languages: English as an attachment in your email.

The manual is 0,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pure drx 701 es

Pure drx 701 es User Manual - German - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info