529117
38
Zoom out
Zoom in
Previous page
1/64
Next page
34
Editing a recording
You can edit a recording to remove sections you do not require. Select the recording and press
the blue (Edit video) button. The Video Editor is then displayed.
The recording starts to play automatically in the window on the right-hand side of the screen.
The duration and the current point in the recording are displayed under this window.
The grey bar in the lower part of the screen is a graphical representation of the recording. The
point that the recording is currently at is indicated by a vertical line across it.
To mark the beginning of the section you want to remove, use the standard play, fast-forward
and rewind controls to reach the required point in the recording and then press the green (Mark
start) button. The selected point in the recording is shown in the Begin Mark window, with the
time of this point displayed underneath it. The selected point is also indicated with a mark on
top of the progress bar.
Moving to another point in the recording and pressing the green (Mark start) button again will
replace the selected start mark with a new start mark.
Mark the end of the section you want to remove by going to the required point in the recording
and then press the yellow (Mark end) button. You must mark a start point first. The section is
then displayed as a white block on the progress bar:
The selected point in the recording is shown in the End Mark window, with time of this point
displayed underneath it. Moving to another point in the recording and pressing the yellow
(Mark end) button again will replace the selected end mark with a new end mark.
You can remove start and end marks by pressing the blue (Clear marks) button.
To delete the marked section from the recording press the red (Remove marked section)
button.
The programme is re-saved on the hard disk with the marked section removed.
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pure Avalon 300R Connect at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pure Avalon 300R Connect in the language / languages: English as an attachment in your email.

The manual is 2,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pure Avalon 300R Connect

Pure Avalon 300R Connect Additional guide - English - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info