674287

Pure Acoustics AV-105BT Manual

7
Zoom out
Zoom in
Previous page
1/8
Next page
www.pure-acoustics.com
See the chart above to determine which tools you'll need for your wiring project.
You'll probably also need a partner to help you with some of the installation steps.
Here are some of the tools you may need for your project: (A) electrical tape; (B) measuring tape; (C) a stud finder;
(D) a utility knife; (E) a drywall saw; (F) string (for pulling wire short distances); (G) a fish tape (for pulling wire longer
distances).
Safety tips
Make sure that you have a thorough understanding of local building and fire codes.
Also read and follow the safety guidelines below and those in the owner's manual.
Be sure to use wire that meets local building and fire code. Use UL-rated wire labeled CL2 or
CL3 for in-wall installations of speaker and audio/video cables, and CM, CMR, or CMP for in-
wall installations of Ethernet cable.
If installing in a house under construction, follow the safety procedures set in place by your
builder, including those relating to the use and storage of extension cords and power tools.
Some sites may require a hard hat or other protective clothing. Remember, you're working
on a construction site, so exercise caution.
In installing in a finished home, make sure the area behind your wall is clear before cutting
(using the techniques discussed in our section on running wire through existing walls).
If you drill through a fire block or firebreak, patch it with comparable material. If you drill holes
between floors, seal them with fire-resistant caulk per National Electric Code standards.
When working on a ladder:
o Place your ladder in a stable position close to where you're working. Don't reach.
o Always have one hand on the ladder.
o Face the ladder when ascending or descending.
o Don't carry heavy items up the ladder that could cause you to lose your balance and
fall.
Unplug your components before connecting the newly installed cables.
Turn off the power in areas you'll be drilling or cutting to avoid electric shock.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pure Acoustics AV-105BT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pure Acoustics AV-105BT in the language / languages: English as an attachment in your email.

The manual is 0,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info