719144
14
Zoom out
Zoom in
Previous page
1/18
Next page
26 27
English
English
STOPWATCH MODE
After 9 hours, 59 minutes and 59.99 seconds have been measured, the stop-
watch stops. Press button A to reset the stopwatch.
Restart and stop of the stopwatch can be repeated by pressing button C.
Measurement of the lap time and split time can be repeated by pressing button A.
After a measurement, lap number flashes, and lap and split times are displayed
for approximately 10 seconds. And then the display automatically returns to show
the on-going measurement and the current lap number.
Measurement of lap and split times can be repeated as many times as necessary.
The lap number can be displayed until "098," and continues to "001," "002," and so
on.
Even if the digits are reset to “00” in the stopwatch measurement, the stored
data is not erased and can be recalled unless a new measurement is started.
Even if the STOPWATCH mode is changed to another while the measurement is
in progress, it continues counting properly. After using the stopwatch function,
be sure to stop the stopwatch to avoid unnecessary battery usage.
WORLD TIME display.
If the watch is left untouched with the digits flashing, it will automatically return
to the TIME/CALENDAR mode in 2 to 3 minutes.
Note on unusual display:
While setting the time/calendar, all the segments of the display will light up if both
buttons A and C are pressed at the same time. This is not a malfunction. Press
any one of the buttons A, B, C, D, or E twice to return to the TIME/CALENDAR
mode, and then set the time/calendar again.
TIMER MODE
[TIMER SETTING]
The flashing digits move quickly if button C or D is kept pressed.
If the watch is left untouched with the digits flashing, it will automatically return to
the TIMER mode in 2 to 3 minutes.
[TIMER OPERATION]
Restart and stop of the timer can be repeated by pressing button C.
To stop the time-up warning beep and time-up beep while sounding, press either
Button A, B, C, D, or E.
MEMORY RECALL mode
If no data is stored in memory, - - - ” mark will be displayed when button B is
pressed to show the memory recall display.
If data is deleted while the stopwatch is measuring, "F---" mark is displayed and the
watch automatically returns to the MEMORY RECALL display.
ALARM MODE
[ALARM TIME SETTING]
The flashing digits move quickly if button C or D is kept pressed.
If the watch is left untouched with the digits flashing, it will automatically return to
the ALARM mode in 2 to 3 minutes.
When the time function is displayed in the 24-hour indication, the alarms are also
displayed in the 24-hour indication.
[ALARM ENGAGEMENT/DISENGAGEMENT]
When any one of the alarms is engaged, the alarm mark is displayed.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pulsar W602 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pulsar W602 in the language / languages: English as an attachment in your email.

The manual is 0,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info