English
14
● If the lap time measurement exceeds 60 minutes, any fraction less than a second will
be discarded when it is displayed. The split time recalled in the MEMORY RECALL
mode, which is the accumulation of the actual lap time measurements, therefore, may
not be exactly equal to the one displayed when it was measured.
MEMORY RECALL MODE
● Up to 75 sets of lap times and split times can be stored in memory.
● Measurement data obtained from the start to finish of a race is recorded as a block, to
which a block number is assigned.
● Up to 38 blocks can be stored in memory.
● When a block of data is erased, the block number is reassigned accordingly.
● When the stored data in all the blocks is erased, the mode is automatically changed to
the STOPWATCH.
● The stored data cannot be erased one by one.
TIMER MODE
● In the timer setting, the flashing digits move quickly if button E is kept pressed.
● If the watch is left untouched with the digits flashing, it will automatically return to the
TIMER mode in 1 to 2 minutes.
● Once the timer is set, the set time is retained and can be used repeatedly unless it is
readjusted.
● Restart and stop of the timer can be repeated by pressing button E.
