572621
6
Zoom out
Zoom in
Previous page
1/32
Next page
4
Remove the lens cap from the objective lens (1).
We suggest that you do not open the lens cap when conducting
observation in the daytime at elevated illumination levels. The light
filter, built in the cap, reduces excessive image brightness and makes
observation more comfortable.
Activate the device by pressing the «ON» (2) button - the green LED (3)
will light up. If the battery is low the color of the indicator will turn red.
To turn off the unit, press the «ON» (2) again.
Locate an object within 20 to 30 meters.
Adjust image brightness by turning the adjustment wheel (4).
Rotate the eyepiece (5) and objective lens (1) until you see a sharp
image.
When changing the viewing distance, try to see a sharp and high-
quality image by rotating the objective lens (1) and brightness
adjustment wheel (4). Do not rotate the eyepiece (5) - the device has
already been individually adjusted.
In low light conditions or in complete darkness you may switch on the
built-in laser IR Illuminator (6) by pressing the “IR” button (7). The laser
IR considerably increases range of detection and identification.
To transmit the observed image to an external LCD monitor, plug one
jackplug of the video cable (supplied) into Recon's video output (8) and
the second jackplug (AV OUT) to an external device. If coupled with
video equipment, the Recon can record the observed image.
Next to the “IR” button there is a button (9), which helps you choose
the color of the display (black and white, green, red) and increase
image contrast. The button (9) works as follows:
- first touch - contrast increase of black and white image;
- second touch - change of display color from black and white to
green;
- third touch - change of display color from green to red (red light
reduces eye strain during observation);
- fourth touch - return to the black and white image.
APPLICATION
57
Меню «Настройки» включает в себя следующие пункты:
Разрешение.
Доступно два разрешения видеоролика отоснимка) - 640x480
(VGA) или 320x240 (QVGA).
Обнаружение движения
Данная функция автоматически включает видеозапись при
обнаружении в поле зрения прибора движущегося объекта.
Подробная информация в разделе ОБНАРУЖЕНИЕ
ДВИЖЕНИЯ.
Датаремя.
Установка времени настройка даты и текущего времени.
Кнопкой “OK” (10) выберите параметр даты (годеньесяц) или
времени (час/минута/секунда). Настройте значение нужного
параметра кнопками (16) (уменьшение параметра) и (17)
величение параметра).
Печать даты - для отображения информации о дате и текущем
времени в видеоролике (фотоснимка) выберите “Дисплей” - “Да”.
Формат.
Для форматирования карты памяти SD выберите “Да”.
Внимание! Перед началом форматирования убедитесь в том, что
все важные данные были сохранены на стороннем носителе.
Производитель не несет ответственность за утерю данных
пользователя.
Фото/видео. Выбор режима работы рекордера - Режим
«Видеозапись» или «Фотосъемка»
Язык (Languages)
Выбор языка интерфейса.
Доступно десять языков:
Английский, китайский, чешский, немецкий, испанский,
французский, итальянский, японский, русский, шведский.
4
Для пере меще ния межд у
пунктами меню «Настройки»
пользуйтесь кнопками (16) и
(17) , для в ыбора п ункта
наж мите «OK» (10) . Д ля
возврата к предыдущему пункту
нажмите «mode» (15) в течение
одной секунды. Для выхода из
меню удерживайте кнопку
«mode» (15) нажатой в течение
двух секунд.
SD
Настройки
РАЗРЕШЕНИЕ
ДВИЖЕНИЕ
ДАТА/ВРЕМЯ
ФОРМАТ
ФОТО/ВИДЕО
Язык
Режим «Фотосъемка»
Включите прибор кнопкой “ON” (2). Настройте прибор согласно
указаниям раздела “Использование прибора”.
Переведите переключатель (13) в положение play”.
USING THE VIDEORECORDER
5
Video mode
The Recon 770R is equipped with a built-in video recorder that allows
recording video clips and capturing pictures of the image seen through
the device's eyepiece.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pulsar Recon 770R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pulsar Recon 770R in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 5,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info