593572
15
Zoom out
Zoom in
Previous page
1/18
Next page
29
English
28
English
REGULAR ALARM MODE
[REGULAR ALARM SETTING]
The flashing digits move quickly if button C or D is kept pressed.
If the watch is left untouched in the REGULAR ALARM SETTING display with the digits
flashing, it will automatically return to the REGULAR ALARM mode in 1 to 2 minutes.
When the 24-hour indication is selected in the TIME/CALENDAR mode, the regular
alarm is also displayed in the 24-hour indication.
When setting the hour digits in the 12-hour indication, check that AM/PM is properly set.
SINGLE-TIME ALARM MODE
[SINGLE-TIME ALARM SETTING]
The flashing digits move quickly if button C or D is kept pressed.
ILLUMINATING LIGHT (Electroluminescent panel)
When button B is pressed in the calendar or blank display of the TIME/CALENDAR
mode, the time/calendar display is shown while the display is illuminated.
The electroluminescent panel loses its luminance as the battery voltage gets lowered.
Also, its luminance level decreases gradually with use.
When the illuminating light becomes dim, replace the batteries with new ones. If the
light remains dim after the batteries are replaced, have the electroluminescent panel
replaced with a new one by the retailer from whom the watch was purchased. It will
be replaced at cost.
While the illuminating light is used, the watch gives out a slight noise. However, this
is not a malfunction.
STOPWATCH MODE
Even if the STOPWATCH mode is changed to a different mode while the measurement
is in progress, it continues counting properly. After the stopwatch is used, however, be
sure to stop it as the battery energy is consumed enormously to shorten the battery
life.
If the watch is left untouched with the city code flashing, it will automatically return to
the TIME/CALENDAR mode in 1 to 2 minutes.
WORLD TIME FUNCTION
TIMER MODE
[TIMER SETTING]
The flashing digits move quickly if button C or D is kept pressed.
If the watch is left untouched in the TIMER SETTING display with the digits flashing, it
will automatically return to the TIMER mode in 1 to 2 minutes.
[TIMER OPERATION]
Before start using the timer, reset the timer time by pressing button D.
Restart and stop of the timer can be repeated by pressing button C.
Even if the TIMER mode is changed to a different mode while the measurement is in
progress, it continues counting properly. After the timer is used, however, be sure to
stop it as the battery energy is consumed enormously to shorten the battery life.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pulsar NX14 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pulsar NX14 in the language / languages: English as an attachment in your email.

The manual is 1,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pulsar NX14

Pulsar NX14 User Manual - German - 20 pages

Pulsar NX14 User Manual - Dutch - 6 pages

Pulsar NX14 User Manual - French - 19 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info