718874
9
Zoom out
Zoom in
Previous page
1/12
Next page
English
English
1716
STOPWATCH
Restart and stop of the stopwatch can be repeated by pressing button A.
Measurement and release of split time can be repeated by pressing button B.
SETTING THE TIME AND ADJUSTING THE STOPWATCH HAND POSITION
NOTES ON OPERATING THE WATCH
When the stopwatch is or has been measuring, if the crown is pulled out to the second
click, it will automatically reset the STOPWATCH hands to “0”.
If the alarm has been set and the crown is pulled out to the second click, the ALARM
hands will turn to indicate the current time.
[MAIN TIME SETTING]
When setting the hour hand, be sure to check that AM/PM is correctly set. The watch
is so designed that the date changes once in 24 hours.
When setting the minute hand, first advance it 4 to 5 minutes ahead of the desired time
and then turn it back to the exact minute.
SETTING THE DATE
It is necessary to adjust the date at the end of February and 30-day months.
Do not set the date between 9:00 p.m. and 1:00 a.m. Otherwise, the date may not
change properly.
Do not press button B when the crown is at the first click position, as this will move the
ALARM hands.
SINGLE-TIME ALARM
The single-time alarm cannot be set for a time more than 12 hours ahead of the current
time. While you keep button B pressed to advance the ALARM hands quickly, they stop
when they indicate the current time and the alarm is disengaged. In that case, release
button B, and then, press and hold the button again to set the ALARM hands to the
desired time.
While the crown is at the normal position, the ALARM hands indicate the current time
when the alarm is disengaged and the designated alarm time when it is engaged.
While the stopwatch is measuring, the alarm rings differently than usual. However, this
is not a malfunction.
While the alarm is ringing, pressing button A or B will only stop the alarm, and no
stopwatch operation can be made.
To correct the alarm time you have set, follow the procedure described in “ALARM
TIME SETTING”.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pulsar DM02 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pulsar DM02 in the language / languages: English as an attachment in your email.

The manual is 0,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info