621719
5
Zoom out
Zoom in
Previous page
1/44
Next page
6
7
The Digisight is designed for observation and shooting in twilight or nighttime.
In complete darkness (no stars or the Moon) use of the built-in IR (or laser)
Illuminator is highly recommended. Your riflescope is a versatile device
designed for a wide range of professional and amateur applications such as
hunting, sports shooting, night video recording and observation.
The riflescope has been designed for long-term usage. To ensure longevity
and performance, please adhere to the following:
Before use make sure that you have installed and fixed the mount
according to the instructions of the section “Installation of mount”.
Store with the lens cap on in the carrying case.
Switch off the scope after use.
The riflescope cannot be submerged in water.
Attempts to disassemble or repair the scope will void the warranty!
Clean the scope's optical surfaces only if necessary, and use caution.
First, remove (by blowing with a blower brush or canned air) any dust or
sand particles. Then proceed to clean by using camera/lens cleaning
equipment approved for use with multicoated lenses. Do not pour the
solution directly onto the lens!
The riflescope can be used in various operating temperatures. However, if
it has been brought indoors from cold temperatures, do not turn it on for 3
to 4 hours. This will prevent external optical surfaces from fogging.
If the scope is unable to mount onto the rifle securely, or you have doubts
about the mounting system, see a qualified gunsmith. Using the weapon
with a poorly mounted scope can lead to inaccurate target shooting!
To ensure reliable performance, it is recommended to carry out regular
technical inspections of the unit.
Do not leave batteries in the unit if it is not going to be used for an extended
period (1 month or more)
Batteries shall not be exposed to excessive heat such as sunshine, fire or
the like.
Unscrew and remove the battery cover (21).
Install four AA batteries according to the marking on the battery
compartment cap.
Replace and screw back the battery cover tightly.
Battery charge level is displayed on the data panel ( ).
In case of complete battery discharge, a red icon is flashing on the data
panel and in the centre of the display.
Autocontrast mode
SumLight™ mode
Brightness and contrast adjustment
Clock
Low battery indicator
Clock setup
IR Illuminator power level
1.5x digital zoom
Indication for external power supply
One shot zeroing
Limiting frame
Auxiliary cross
Activation of wireless remote control
Reticle moving directions
Reticle's X and Y coordinates
PAL/NTSC video output signal selection
Weapon selection
Reticle selection
x1.5
Note: to ensure long and reliable operation it is recommended that you use quality
rechargeable batteries with a capacity of at least 2500 mAh. Please do not use
batteries of different types or batteries with various charge levels.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pulsar DIGISIGHT N750A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pulsar DIGISIGHT N750A in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 2,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info