593556

Pulsar 8F56 Manual

10
Zoom out
Zoom in
Previous page
1/14
Next page
English
English
1918
NOTES ON OPERATING THE WATCH
TIME (DUAL TIME) / DATE SETTING
● When setting the date, turn the crown counterclockwise to advance the date and
clockwise to move it back. The date changes one day by turning the hour hand two
full circles.
● The date changes between 11:45 p.m. and 0:30 a.m. while the watch is in operation
and between 9:00 p.m. and 3:00 a.m. when it is changed manually by turning the
hands. Therefore, note the following.
[AM/PM checking]
When setting the hour hand, check that AM/PM is correctly set.
* When setting the time by advancing the hands, turn the hour hand past the 3
o’clock marker. If the date advances, the time is set for the AM period. If it does
not change, the time is set for the PM period.
* When setting the time by turning back the hands, turn the hour hand past the 9
o’clock marker. If the date moves back, the time is set for the PM period. If it does
not change, the time is set for the AM period.
[Setting the time between 9:00 p.m. and 3:00 a.m.]
* If the time is adjusted to the time period between 9:00 p.m. and 3:00 a.m., the
date may not change properly. The watch, however, will indicate the date
properly after 3:00 a.m.
* To prevent this from occurring, first turn back the hour hand past 9:00 p.m.,
checking that the date moves back to the previous day, and then, advance the
hands to the desired time.
TIME DIFFERENCE ADJUSTMENT DURING TRIP
● To put back the time, turn the crown clockwise. To advance the time, turn it
counterclockwise.
● When moving back the hour hand past the 12 o’clock marker to set it to a time
between 9:00 p.m. and 0:00 a.m., put back the hour hand further past 8:00 p.m., and
then advance it to the desired hour.
TIME DIFFERENCE
● The time differences and the use of daylight saving time (summer time) may change
in some areas or countries when they are so decided by the countries concerned.
HOW TO CHECK THE CALENDAR
● If the crown is pulled out to the second click instead of the first click and pushed back
in to the normal position, the watch will not show the calendar.
● Do not leave the crown at the first or second click when you use the watch, as this
will shorten the battery life.
● Note on the leap second
One day normally is said to consist of 86,400 seconds. In fact, it can be longer
or shorter than this because of irregular changes in the rotation cycle of the
earth. When the accumulated fluctuations in the length of a day total plus or
minus one second, one second must then be added or subtracted as a
correction factor. This is known as a “leap second”.
● When setting the minute hand, advance it 4 to 5 minutes ahead of the desired time
and then turn it back to the exact time.
● The hour hand moves in one hour increments.
● When adusting the date and hour hand, turn the crown slowly. In doing so, the other
hands may move slightly. However, this is not a malfunction.
05.4.19, 9:10 AMPage 18-19
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pulsar 8F56 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pulsar 8F56 in the language / languages: English as an attachment in your email.

The manual is 1,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info